Sony BKP-7933 User Manual

1-20 (E)

BKP-7933

1.

Select the menu item “Z:BKP-7933 CONFIGURA-
TION” and press [ENTER].

SONY ROUTING SYSTEM SETUP MENU         BKP-7933 V1.00      STATION NUMBER 2

   

                         MODIFICATION COMMAND

 A: SET UNIT LOCATION(CAM-CCU)          B: SET UNIT LOCATION(CCU-RCP)

 C: SET UNIT LOCATION(MSU)

 K: RESET TO DEFAULT TABLE

                         MAINTENANCE COMMAND

 Z: BKP-7933 CONFIGURATION

 Ctrl-D RETURN

BKP-7933 CONFIGURATION                 BKP-7933 V1.00      STATION NUMBER 2

                         S-BUS CONFIGURATION

         A: ROUTER PIX1 ASSIGN         B: ROUTER WF1 ASSIGN

         C: ROUTER PIX2 ASSIGN         D: ROUTER WF2 ASSIGN

         E: ROUTER PIX3 ASSIGN         F: ROUTER WF3 ASSIGN

         G: S-BUS TALLY                H: BKP-7933  MODE

                                                   Ctrl-E RETURN TO MENU

2.

Select the menu item “H:BKP-7933 MODE” and press
[ENTER].

3.

Move the cursor key to the “LINK MSU” of  “2 RCP

PREVIEW SWITCH” and press [ENTER].

[Notes|when|LINK|MSU|is|selected]

[Notes|when|LINK|MSU|is|selected]

[Notes|when|LINK|MSU|is|selected]

[Notes|when|LINK|MSU|is|selected]

[Notes|when|LINK|MSU|is|selected]
. It is linked to the MSU only that is connected to

CNU-700 in which the BKP-7933 is installed.

(It is not linked with the MSU that is connected to

the CNU IF board BKP-7930, nor with the MSU

that is connected to the CNU-700 in which the BKP-

7933 is not installed.)

. The RCP that is connected to the CNU-700 only is

validated.

1-7. Setting Up

BKP-7933 CONFIGURATION                 BKP-7933  V1.00   STATION NUMBER 2

      1  SBUS TALLY SYSTEM        [    OFF    ]   [    ON     ]

2  RCP PREVIEN SWITCH       [INDEPENDENCE]  [ LINK MSU  ]

3  CAMERA No                [    CNU    ]   [SOURCE NAME] 

4 DIAGNOSIS DISPLAY         [    OFF    ]   [    ON     ]

                                                    Ctrl-E RETURN TO MENU