Sony BKP-7933 User Manual

1-38 (E)

BKP-7933

After the BZR-10 is installed according to Section 1-8-1, perform the following procedures.
1.

Insert the FD on which the data is stored in an FD drive of the personal computer.

2.

Type as follows.

C:\>

"

A \>

*

"

Type “a” or “a1”.

n
“a” or “a1” is the command to start up the backup software.
Type “a” or “a1” according to the baud rate setting of S2-4 on the CPU-256 board of the BKPF-R70.
a:

When S2-4 is set to ON (The baud rate is 9600 bps)

a1: When S2-4 is set to OFF (The baud rate is 38400 bps)

3.

Type “3” at the Function menu. (“3. SEND” is selected.)
The display changes to the Execution menu screen.

4.

To restore the data of the BKP-7933, type “2”. (“2. The data of secondary stations ” is selected.)

5.

Type “9” twice. (“9. Quit” is selected.) The backup mode is terminated.

[[[ Routing Switcher Data Backup Software ]]]

[[[           BZR-10  V1.10               ]]]

1. RECEIVE: from primary station

2. EDIT

3. SETD: to primary station

- - - - - - - -

9. QUIT

..... Select a menu item

[1,2,3,9]?

...To primary station

[[[ Send Menu ]]]

 1. All the data of primary station

 2. The data of secondary stations

 3. Description names

 4. Crosspoint data

 - - - - - - - - - - - - - - - - - -

 9. Quit

 ..... Select a menu item

[1,2,3,4,9]?

Selects 
“3. SEND”

Type “3”
(Not press 
Enter key)

1-8. Data Backup/Restore