Sony BKAM-101 User Manual

1-3(E)

AMS-100

The AMS-100 can be mounted in a 19-inch standard rack.

n
. If the AMS-100 or the peripheral equipment is mounted

in a 19-inch standard rack, it is recommended to install a
ventilation fan to prevent a temperature rise in the rack.

Make sure that all the units in the rack should be operat-
ed within the temperature range of 5

dC to 40dC.

. Connect the enough long cables on the rear panel,

considering that the AMS-100 is pulled out.

. Be sure to fix the rack to the floor with bolts.

This will prevent the rack from falling when the unit is

pulled out from the rack.

. Rack mount rail (RMM-30)

Rail with bracket

: 2 pcs.

Screw (B5

x8)

: 4 pcs.

Screw (PWH4

x10)

: 2 pcs.

Plate nut

: 2 pcs.

. Screw for inner rail (B4x8)

: 6 pcs.

. Screw for rack mounting (RK5x16) : 4 pcs.
. Washer for rack mounting

: 4 pcs.

(Sony part number : 2-297-913-00)

c
Be sure to use the RMM-30 rack mount rail.

If a rack mount rail other than the RMM-30 is used, the

AMS-100 may be dropped by insufficient strength of the

rack mount rail.  This may cause a injury.

1.

Turn off the power.

2.

Attach the inner rails to the unit using the six screws
(B4

x8) supplied with the RMM-30.

3.

Temporarily fix the front and rear brackets to the rack

by running in but not tightening the four screws

(B5

x8) and two screws (PWH4x10) supplied with the

RMM-30.

_To be continued on the next page._

B 4

x

8

B 4

x

8

Inner rail

Inner rail

1-4. Rack Mounting

PWH 4

x

10

Plate nut

15.9

15.9

12.7

15.9

15.9

12.7

Rack

B 5

x

8

Front bracket

Rear bracket

31.75