Sony bravia 4-115-568-12(1) User Manual
12
GB
Safety
Information
Information
Installation/Set-up
Install and use the TV set in accordance with the instructions below
in order to avoid any risk of fire, electrical shock or damage and/or
injuries.
in order to avoid any risk of fire, electrical shock or damage and/or
injuries.
Installation
s The TV set should be installed near an easily accessible mains
socket.
s Place the TV set on a stable, level surface.
s Only qualified service personnel should carry out wall
s Only qualified service personnel should carry out wall
installations.
s For safety reasons, it is strongly recommended that you use
Sony accessories, including:
–
–
Wall-mount bracket SU-WL500/SU-WL700
s Be sure to use the screws supplied with the Wall-mount bracket
when attaching the mounting hooks to the TV set.
The supplied screws are designed so that they are 8 mm to 12
mm in length when measured from the attaching surface of the
mounting hook.
The diameter and length of the screws differ depending on the
Wall-mount bracket model.
Use of screws other than those supplied may result in internal
damage to the TV set or cause it to fall, etc.
The supplied screws are designed so that they are 8 mm to 12
mm in length when measured from the attaching surface of the
mounting hook.
The diameter and length of the screws differ depending on the
Wall-mount bracket model.
Use of screws other than those supplied may result in internal
damage to the TV set or cause it to fall, etc.
Transporting
s Before transporting the TV set,
disconnect all cables.
s Two or three people are needed to
transport a large TV set.
s When transporting the TV set by
hand, hold it as shown on the right.
Do not put stress on the LCD panel
and the frame around the screen.
Do not put stress on the LCD panel
and the frame around the screen.
s When lifting or moving the TV set,
hold it firmly from the bottom.
s When transporting the TV set, do not
subject it to jolts or excessive
vibration.
vibration.
s When transporting the TV set for
repairs or when moving, pack it
using the original carton and packing
material.
using the original carton and packing
material.
Ventilation
s Never cover the ventilation holes or insert anything in the
cabinet.
s Leave space around the TV set as shown below.
s It is strongly recommended that you use a Sony wall-mount
s It is strongly recommended that you use a Sony wall-mount
bracket in order to provide adequate air-circulation.
Monitor
Installed on the wall
Installed with stand
Media receiver
s To ensure proper ventilation and prevent the collection of dirt
or dust:
–
–
Do not lay the TV set flat, install upside down, backwards,
or sideways.
or sideways.
–
Do not place the TV set on a shelf, rug, bed or in a closet.
–
Do not cover the TV set with a cloth, such as curtains, or
items such as newspapers, etc.
items such as newspapers, etc.
–
Do not install the TV set as shown below.
8mm – 12mm
Screw (supplied with the Wall-
mount bracket)
mount bracket)
Mounting Hook
Hook attachment on rear
of TV set
Hook attachment on rear
of TV set
Be sure to hold the
bottom of the panel,
not the front part.
bottom of the panel,
not the front part.
30 cm
10 cm
10 cm
10 cm
Leave at least this space around the set.
30 cm
10 cm
10 cm
6 cm
Leave at least this space around the set.
Installed horizontally
Installed vertically
Top
Front
Top
Front
Leave at least this space around the set.
Leave at least this space around the set.
20 cm
8 cm
8 cm
20 cm
6 cm
6 cm
6 cm
6 cm
10 cm
8 cm
8 cm
10 cm