Sony bravia kdl-19s57xx User Manual

 GB

Turn on the connected equipment, then 
perform one of the following operation.

For an auto-tuned VCR page 7
In analogue mode, press PROG +/-, or the number 
buttons, to select the video channel. 

For other connected equipment 
Press 

 to display the connected equipment list. 

Press 

F

/

f

 to select the desired input source, then 

press  . (The highlighted item is selected if two 

seconds pass without any operation after pressing 

F

/

f

.)

For a USB device
See page 19.

~

• Be sure to use only an authorised HDMI cable bearing 

the HDMI logo. We recommend that you use a Sony 
HDMI cable.

• When HDMI control compatible equipment is 

connected, communication with the connected 
equipment is supported. Refer to page 19 to set up this 
communication.

 Component To see the equipment connected to 

A.

 HDMI1, 
 HDMI2

HDMI IN 1, HDMI IN 2
To see the equipment connected to 
B or J.

Digital video and audio signals are 
input from the connected equipment.
If the equipment has a DVI socket, 
connect the DVI socket to the 
HDMI IN 1 socket through a DVI-
HDMI adaptor interface (not 
supplied), and connect the 
equipment’s audio out sockets to the 
audio in sockets in the HDMI IN 1 
sockets.
Connect to the HDMI IN 2 socket, 
to view photographs or screen 
images from a PC or digital video 
camera.

AV1/

 

AV1

To see the equipment connected to 
C.

AV2/

 

AV2/

 AV2

To see the equipment connected to 
D.

 

PC

To see the equipment connected to 
F.

z

• It is recommended to use a PC cable 

with ferrites like the “Connector, D-
sub 15” (ref. 1-793-504-11, 
available in Sony Service Centre), or 
equivalent.

 USB

To see the equipment connected to 
I.

To view photographs or listen to the 
music on USB storage media 
connected to the TV.

 AV3

To see the equipment connected to 
K.

When connecting mono equipment, 
connect to the 

 AV3 L socket.

Conditional 
Access Module 
(CAM) 

H

To use Pay Per View services.
For details, refer to the instruction 
manual supplied with your CAM. To 
use the CAM, remove the “dummy” 
card from the CAM slot. Turn off the 
TV when inserting or removing your 
CAM. When you do not use the 
CAM, we recommend that the 
“dummy” card be inserted and kept in 
the CAM slot.
~

• CAM is not supported in some 

countries/regions. Check with your 
authorised dealer.

Hi-Fi audio 
equipment 

E

Connect to the audio output sockets 

 to listen to the sound from the 

TV on Hi-Fi audio equipment.
Audio level of the external speakers 
can be modified by pressing the 
volume buttons on the remote control.

DIGITAL 
AUDIO OUT 
(OPTICAL) 

G

Use an optical audio cable.

Headphones 
L

Connect to the 

i socket to listen to 

sound from the TV on headphones.

Return to normal 
TV mode

Press DIGITAL or ANALOG.