Sony bravia kdl-22s55xx User Manual

 GB

Before you start auto-tuning the TV, insert 
a pre-recorded tape into the VCR 
connected to the TV (page 5) and start 
play back.

The video channel will be located and stored on 
the TV during auto-tuning.
If no VCR is connected to the TV, skip this step.

Press .

The TV starts searching for all available digital 
channels, followed by all available analogue 
channels. This may take some time, so do not 
press any buttons on the TV or remote while 
proceeding.
If a message appears for you to confirm the 
aerial connection
No digital or analogue channels were found. 
Check all the aerial connections and press 

 to 

start auto-tuning again. 

When the Programme Sorting menu 
appears on the screen, follow the steps of 
“Programme Sorting” (page 27).

If you do not change the order in which the 
analogue channels are stored on the TV, go to 
next step.

When the Eco Preset menu appears on 
the screen, if you press “Yes,” the “Eco” 
settings are changed to recommended 
values to reduce power consumption.

Press MENU to exit.

The TV has now tuned in all the available 
channels.

~ 
• Do not remove the Table-Top Stand for any reason other 

than to wall-mount the TV.

Table-Top 
Stand

Table-Top 
Stand