Sony bravia kdl-26u40xx User Manual

 GB

Switch on the connected equipment, then 
perform one of the following operation.

a fully-wired 21-pin scart lead 
Start playback on the connected equipment.
The picture from the connected equipment appears 
on the screen.

For an auto-tuned VCR/ DVD recorder
In analogue mode, press PROG +/-, or the number 
buttons, to select the video channel. 

For other connected equipment 
Press 

/  to display the connected equipment 

list. Press 

F

/

f

 to select the desired input source, 

then press  . (The highlighted item is selected if 2 

seconds pass without any operation after pressing 

F

/

f

.) 

When the input source is set to “Skip” in the “AV 

Preset” menu under the “Set-up” menu (page 24), 

that input does not appear in the list. 

AV1/
AV1

To see the equipment connected to 

1

.

AV2/
AV2/

 AV2

To see the equipment connected to 

2

.

~
SmartLink is a direct link between 
the TV and a VCR/DVD recorder.

AV3

To see the equipment connected to 

3

.

HDMI 1*

To see the equipment connected to 

4

.

HDMI 2*

To see the equipment connected to 

5

.

HDMI 3*

To see the equipment connected 
to 

6

.

If the equipment has a DVI socket, 
connect the DVI socket to the 
HDMI IN socket through a DVI-
HDMI adaptor interface (not 
supplied), and connect the 
equipment’s audio out socket to the 
audio in HDMI IN socket (page 24).

*  ~
• Be sure to use only an authorized HDMI cable bearing 

the HDMI logo. We recommend that you use a Sony 
HDMI cable.

• When “Control for HDMI” compatible equipment is 

connected, communication with the connected 

equipment is supported. Refer to page 18 to set up this 

communication.

 COMP

To see the equipment connected to 

7

.

 PC 

To see the equipment connected to 

8

.

z
It is recommended to use a PC 

cable with ferrites, such as the 

"Connector, D-sub 15"  (ref. 1-

793-504-11, available in Sony 

Service Centre) or equivalent.

Headphones 

9

Connect to the i socket to listen to 
sound from the TV on headphones.

Conditional 
Access Module 
(CAM) 

0

To use Pay Per View services.
For details, refer to the instruction 
manual supplied with your CAM. 
To use the CAM, remove the rubber 
cover from the CAM slot. Switch 
off the TV when inserting your 
CAM into the CAM slot. When you 
do not use the CAM, we recommend 
that you replace the cover on the 
CAM slot.
~
CAM is not supported in all countries. 
Please check with your authorized 
dealer.

Hi-Fi audio 
equipment 

qa

Connect to the audio output sockets 

 to listen to the sound from the 

TV on Hi-Fi audio equipment.

Return to normal TV 

mode

Press DIGITAL or 
ANALOG. 

Access the Digital 

Favourites (in digital 

mode only)

Press . 
For details, see page 15.

Change the volume of 

the connected “Control 

for HDMI” compatible 

audio system

Press 

2

 +/-.

Mute the sound of the 

connected “Control for 

HDMI” compatible 

audio system

Press 

%

.

Press again to restore.

010COV.book  Page 17  Friday, July 4, 2008  12:56 PM