Sony bravia kdl-46w5100 User Manual

The BRAVIA Sync function allows this TV to communicate with other Sony equipment 
supporting the Control for HDMI function.

Use an HDMI cable that bears the HDMI logo for connection.
Line up the triangle on the head of the HDMI cable with the triangle on the label of the HDMI 
input when connecting the HDMI cable.

The Control for HDMI function must be set up in order for the TV to communicate with other 
Control for HDMI enabled equipment.
To setup the TV’s Control for HDMI:

Select Channels & Inputs on the Settings menu.

Highlight HDMI Settings and press 

.

Select Control for HDMI and set it to On.

To verify connected devices, select Device List from the HDMI Settings menu.
For other equipment, refer to its operating instructions.

The following operations are available after you connect the supported Sony equipment with 
Control for HDMI function to your TV:
• Automatically turn off the connected equipment when you turn off the TV.
• The connected equipment and TV are turned on by One-Touch-Play.
• Possible operations with BRAVIA Sync buttons, see page 18.

When a Sony A/V receiver with BRAVIA Sync is connected, the following additional operations 
are possible:
• Turning on the A/V receiver when the TV is turned on.
• Automatically switching to the audio output of the A/V receiver’s attached speakers.
• Adjusting the volume and muting of the A/V receiver with the TV’s remote control.