Sony bravia kdl-46w5100 User Manual

Some TV models are packaged with a 
detached Table-Top Stand so you can mount 
your TV to a wall right away. If you are not 
mounting the TV to a wall, you will need to 
attach the Table-Top Stand. You will need a 
Phillips screwdriver and the supplied screws to 
complete the task. Look for the attachment 
instructions provided with the TV.
Be sure to consider the following while setting 
up your TV:

• Disconnect all cables when carrying the 

TV.

• Carry the TV with the adequate number of 

people; larger size TVs require two or 
more people.

• Correct hand placement while carrying the 

TV is very important for safety and to 
avoid damage.

• Ensure your TV has adequate ventilation, 

see page 15.

• For best picture quality, do not expose the 

screen to direct illumination or sunlight.

• Avoid installing the TV in a room with 

reflective wall and floor materials.

• Avoid moving the TV from a cold area to a 

warm area. Sudden room temperature 
changes may cause moisture condensation. 
This may cause the TV to show poor 
picture and/or poor color. Should this 
occur, allow moisture to evaporate 
completely before powering the TV on.

All models can be mounted on a wall using a 
Wall-Mount Bracket (not supplied). Models 

 

52 inch and larger (measured diagonally) will 
require removing the Table-Top Stand; refer to 
the instructions provided with the TV.
Prepare the TV for the Wall-Mount Bracket 
before making cable connections.
For product protection and safety reasons, 
Sony strongly recommends that you use the 
Wall-Mount Bracket designed for your TV 
and the installation should be performed by a 
Sony dealer or licensed contractor.

• Follow the instruction guide provided with the 

Wall-Mount Bracket for your model. You may 
also need to refer to the online Reference Book 
for additional information for your TV model. 
Sufficient expertise is required in installing 
this TV, especially to determine the strength of 
the wall for withstanding the TV’s weight.

• Be sure to use the screws supplied with the 

Wall-Mount Bracket when attaching the 
mounting hooks to the TV set. (Do not use 
the screws that are intended for the Table-
Top Stand attachment.)

 

The supplied M6 screws are designed so 
that they are 8 mm to 12 mm in length 
when measured from the attaching surface 
of the mounting hook.

 

Use of screws other than those supplied 
with the bracket may result in internal 
damage to the TV set or cause it to fall, etc.

• Be sure to store the unused screws and 

Table-Top Stand in a safe place until you 
are ready to attach the Table-Top Stand. 
Keep the screws away from small children.

KDL-65W5100

8-12 mm

M6 screw 

 

(supplied with the 
Wall-Mount Bracket)
Mounting Hook

Rear of the TV set

• Read the supplied Safety Booklet for 

additional safety information.