Sony bravia kdl-40w40xx User Manual

 GB

Switch on the connected equipment, then 
perform one of the following operation.

a fully-wired 21-pin scart lead 
Start playback on the connected equipment.
The picture from the connected equipment appears 
on the screen.

For an auto-tuned VCR/ DVD recorder 
In analogue mode, press 

, or the number 

buttons, to select the video channel. 

For other connected equipment 
Press 

/

 to display a list of connected 

equipment.  Press 

F

/

f

 to select the desired input 

source, then press 

.

The highlighted item is automatically selected if you 
do not perform any operation for two seconds after 
pressing

 

.

If you have set an input source to "Skip" in the "AV 
Preset" menu (page 26), that input source does not 
appear in the list.

z

To return to normal TV mode, press 

 or 

.

AV1

To see the equipment connected to 
A.

AV2

To see the equipment connected to 
B.

~

SmartLink is a direct link between 
the TV and a VCR/DVD recorder.

AV3

To see the equipment connected to 
L.

HDMI 1

HDMI IN 1*.
To see the equipment connected to 
D.

HDMI 2

HDMI IN 2*.
To see the equipment connected to 
E.
If the equipment has a DVI socket, 
connect the DVI socket to the 
HDMI IN socket through a DVI-
HDMI adaptor interface (not 
supplied), and connect the 
equipment’s audio out socket to the 
audio in HDMI IN socket.

HDMI 3

HDMI IN 3*.

To see the equipment connected to 
K.

*  ~
• Be sure to use only an HDMI cable that bears the HDMI 

logo.

• When “Control for HDMI” compatible equipment is 

connected, communication with the connected 
equipment is supported. Refer to page 19 to set up this 
communication.

• When connecting an audio system with HDMI socket, 

be sure to also connect to the HiFi socket.

 Component

To see the equipment connected to 
C.

PC                       

To see the equipment connected to 
H.

z

It is recommended to use a PC 
cable with ferrites, such as the 
"Connector, D-sub 15"  (ref. 1-
793-504-11, available in Sony 
Service Centre) or equivalent.

Headphones M Connect to the i socket to listen to 

sound from the TV on headphones.

Conditional 
Access Module 
(CAM) I

To use Pay Per View services.
For details, refer to the instruction 
manual supplied with your CAM. To 
use the CAM, remove the rubber 
cover from the CAM slot. Switch off 
the TV when inserting your CAM 
into the CAM slot. When you do not 
use the CAM, we recommend that 
you replace the cover on the CAM 
slot.
~
CAM is not supported in all countries. 
Please check with your authorized 
dealer.

Hi-Fi audio 
equipment G

Connect to the audio output sockets 

 to listen to the sound from the 

TV on Hi-Fi audio equipment.

DIGITAL 
AUDIO OUT 
(OPTICAL) F

Use an optical audio cable.

USB J

Use USB memory to display photos.

Return to normal TV 
mode

Press 

 or 

. 

010COV.book  Page 18  Wednesday, March 19, 2008  9:51 AM