Sony bravia kdl-40w40xx User Manual

 GB

Press .

Press 

F

/

f

 to select “Quick Scan” or “Full 

Scan”, then press 

.

"Quick Scan" : channels are tuned according to 
the cable operator information within the 
broadcast signal. 
Recommended setting for "Frequency", 
"Network ID" and "Symbol Rate" is "Auto".
This option is recommended for fast tuning 
when supported by your cable operator. 
If the "Quick Scan" does not tune, please use the 
"Full Scan" method below.
"Full Scan" : All available channels are tuned 
and stored. This procedure may take some time.
This option is recommended when "Quick Scan" 
is not supported by your cable provider.
For further information about supported cable  
providers, refer to support web site: 
http://support.sony-europe.com/TV/DVBC/

Press 

f

 to select “Start”, then press 

.

The TV starts searching for channels. Do not 
press any buttons on the TV or remote.

~
Some cable providers do not support “Quick Scan”. If no 
channels are detected using “Quick Scan”, perform “Full 
Scan”.

~
Do not remove the Table-Top Stand for any reason other 
than to wall-mount the TV.

010COV.book  Page 8  Wednesday, March 19, 2008  9:51 AM