Sony bravia kdl-46wl135 User Manual

For details, see page 45.

This TV can be installed on a wall by using a Wall-
Mount Bracket (sold separately). Before mounting 
the TV on a wall, the Table-Top Stand must be 
removed from the TV.

Follow the simple steps below to remove the 
Table-Top Stand:

Disconnect all the cables from the TV.

Start removing the screws behind the TV (See 
illustration below). Do not remove any other 
screws from the TV.

Secure the Mounting Hook to the rear of the 
TV.

Adjust the angle of the Mounting Hook.

When screws are removed, lift the TV off the 
stand. Make sure that you carry out this task 
with at least two people. Do not attempt to lift 
the TV by yourself.

~

• Do not remove the Table-Top Stand for any reason 

other than to wall-mount the TV.

• When using an electric screwdriver, set the torque 

setting to approximately 2 N·m {20 kgf·cm}.

• Be sure to store the removed screws and Table-Top 

Stand in a safe place until you are ready to reattach the 
Table-Top Stand. Keep the screws away from small 
children.

• For bracket installation, refer to the supplied Installing 

the Wall-Mount Bracket and the instruction guide 
provided by the Wall-Mount Bracket model for your 
TV. Sufficient expertise is required in installing this 
TV, especially to determine the strength of the wall for 
withstanding the TV’s weight.