Sony bravia kdl-40ex521 User Manual

D:\Cmeng's JOB\SONY TV\SY0279_W1 (Rev-1)\4267385121_US\US03STU.fm

KDL-EX523/EX521/EX520

4-267-385-12(1)

B KDL-40/32EX521 (Mexico models)

~

• Align the TV from the top, slide it in until the 

guide pins cannot be seen.

Use the supplied screws to attach the 
TV unit to the Table-Top Stand.

B KDL-46/40/32EX52x (except 

B KDL-40/32EX521 (Mexico models)

~

• If you use an electric screwdriver, set the 

torque at approximately 1.5 N·m {15 kgf·cm}.

To detach the Table-Top Stand from the 
TV, remove the screws 

 fixed in step 2.

~

• Do not remove the Table-Top Stand for any 

reason other than to install corresponding 
accessories on the TV.

• When removing the Table-Top Stand from the 

TV, lay the display face down on a stable work 
surface that is larger than the TV.

• To prevent damaging the surface of the LCD 

display, make sure to place a soft cloth on the 
work surface.

• When installing the TV on a wall, remove the 

screws from the rear of the TV. The screws and 
number of screws depends on the TV model. 
(They are fastened in the screw holes for wall 
mounting.) Be sure to store the removed 
screws in a safe place, keeping them away 
from children.

• When attaching the Table-Top Stand again, be 

sure to fasten the screws (previously removed) 
to the original holes on the rear of the TV.

This TV can be adjusted within the angles 
as illustrated.

~

• When adjusting the angle, hold the stand with 

one hand to avoid having the stand slip or TV 
tip over.

B KDL-46/40/32EX52x (except 

Guide 
pins

20°

20°

20°

20°