Sony bravia kdl-32ex521 User Manual

Page of 32
7
D:\Cmeng's JOB\SONY TV\SY0279_W1 (Rev-1)\4267385121_US\US03STU.fm
KDL-EX523/EX521/EX520
4-267-385-12(1)
Getting Started
Before setting up your TV
Some TV models are packaged with a 
detached Table-Top Stand so you can 
mount your TV to a wall right away. If you 
are not mounting the TV to a wall, you will 
need to attach the Table-Top Stand. You 
will need a Phillips screwdriver and the 
supplied screws to complete the task. Look 
for the supplied Table-Top Stand instruction 
leaflet. 
Be sure to consider the following while 
setting up your TV: 
Disconnect all cables when carrying the 
TV. 
Carry the TV with the adequate number 
of people; larger size TVs require two or 
more people. 
Correct hand placement while carrying 
the TV is very important for safety and 
to avoid damage. 
Ensure your TV has adequate 
ventilation, see page 15.
For best picture quality, do not expose 
the screen to direct illumination or 
sunlight.
Avoid installing the TV in a room with 
reflective wall and floor materials.
Avoid moving the TV from a cold area 
to a warm area. Sudden room 
temperature changes may cause moisture 
condensation. This may cause the TV to 
show poor picture and/or poor color. 
Should this occur, allow moisture to 
evaporate completely before powering 
the TV on.
Ensure that there are no objects in front 
of the TV.
Do not expose the Presence Sensor to 
direct sunlight or other strong light, as 
malfunction may occur.
1: Attaching the Table-Top 
Stand
Refer to the supplied Table-Top Stand 
instruction leaflet for proper attachment.
1
Place the TV unit on the Table-Top 
Stand.
~
• Do not put stress on the LCD panel or the 
frame around the screen.
• Be careful to not pinch your hands or the AC 
power cord when you install the TV unit to the 
Table-Top Stand.
KDL-46/40/32EX52x (except 
KDL-40/32EX521 (Mexico models))
Presence Sensor
IR Sensor
Guide 
pins
(Continued)