Sony bvm-14e5e User Manual

25

Chapter 2  Menus

The preliminary adjustment of contrast, brightness,
chroma, and phase are carried out with the CONTROL
PRESET ADJ menu to set the preset values to the
knobs for the above-mentioned adjustments.  Preset
values can be set either commonly to all channels or
separately for individual channels.
Preset values can be set in the following ways:

(1) Adjustment with the MANUAL knobs
(2) Automatic adjustment (An external color bar signal

is necessary.)

(3) Copying data from other channels, common data,

other BVM-series monitors that have been
connected via the serial remote connector, or from
data stored in monitor memory cards

(4) Restoring factory settings.

[A]

[A] CONTROL PRESET ADJ menu
Select either PRESET or CH SET. 

÷ [A1]

PRESET...: Set common values.
CH SET...: Set values for each individual channel.

[A1] PRESET/CH SET menu
Select the setting method.

MANUAL...: Set with the MANUAL knobs. 

÷

[A11]

AUTO...: Set by automatic adjustment. 

÷ [A12]

COPY...: Copy data from elsewhere. 

÷ [A13]

This section describes the functions of the constituent
menus of the CONTROL PRESET ADJ menu.

• The menu numbers (A, B1, C11 and so on) are not

displayed on the monitor screen.

• An arrow (

÷) following the description of an item

or setting in each menu indicates another menu which
appears or an operation which is executed when you
select that menu item or setting. If the description of
an item or setting is not followed by an arrow, it
indicates that selecting the item or setting finishes the
setting operation.

PRESET        A1

CH SET 

MANUAL  A11

AUTO  A12

COPY  A13

PHASE

CHROMA

BRIGHT

CONTRAST

FULL FIELD CB100

FF CB 75 (WHITE 100)

SMPTE CB

EIA CB

OTHER VALUE   A131

OTHER MONITOR   A132

MEMORY CARD   A133

PRESET

CH SET

MONITOR ADDRESS   A1321

 FILE NAME   A1331

PRESET

CH SET

PRESET

CH SET