Sony bvm-14e5e User Manual

53

Chapter 2  Menus

The STATUS menu is used to view general data about
the monitor and information about signals assigned to
the slots in the rear panel.

[F]

This section describes the functions of the constituent
menus of the STATUS menu.

• The menu numbers (A, B1, C11 and so on) are not

displayed on the monitor screen.

• An arrow (

÷) following the description of an item

or setting in each menu indicates another menu which
appears or an operation which is executed when you
select that menu item or setting. If the description of
an item or setting is not followed by an arrow, it
indicates that selecting the item or setting finishes the
setting operation.

[F] STATUS menu
Select the STATUS menu.  

÷ [F1]

[F1] STATUS menu (1/3)
Specify the channel block to be detected from channel
1 to channel 99.

[F11] CH STATUS menu (1/3)
Data about the current channel is displayed.

CH: channel number
SL: slot number
IN: input connector number
FORMAT: format of the input signal
NAME: channel name

[F2] STATUS menu (2/3)
Data about the monitor is displayed.

MODEL NAME: model name
SERIAL NO: serial number
OPERATION TIME: operation time (in hours)
SOFTWARE VERSION: software version

[F3] STATUS menu (3/3)
Display the current assignments of options to slots at
the rear. (When the BKM-21D is installed in SLOT 2,
the display is as shown below. When not, “EMPTY” is
displayed as status of SLOT 2.

[F31] SLOT STATUS menu
Select the desired slot. Data about the optional board
installation in the selected slot is displayed.

MODEL NAME: Model name of that optional board
SERIAL NO: Serial number of that circuit board

STATUS  F

STATUS (1/3)  F1

 STATUS (2/3)  F2

 STATUS (3/3)  F3

CH STATUS  F11

 

 MODEL NAME

SLOT STATUS  F31

CH

 

 MODEL NAME

SERIAL NO