Sony CCD-TRV95 User Manual

You can choose any of the following power sources for your camcorder: battery pack,
house current, alkaline batteries and 12/24 V car battery.  Choose the appropriate
power source depending on where you want to use your camcorder.

Notes on power sources
•Disconnecting the power source or removing the battery pack during recording or

playback may damage the inserted tape.

•The DC IN jack has source priority. This means that the battery pack cannot supply

any power if the power cord is connected to the DC IN jack, even when the power
cord is not plugged into a wall outlet.

(1) Open the DC IN jack cover, and connect the AC power adaptor to the DC IN

jack on the camcorder.

(2) Connect the power cord to the AC power adaptor.
(3) Connect the power cord to a wall outlet.

WARNING
The power cord must only be changed at a qualified service shop.

PRECAUTION
The set is not disconnected from the AC power source (house current) as long as it is
connected to the wall outlet, even if the set itself has been turned off.

Note
Keep the AC power adaptor away from the camcorder if the picture is disturbed.

House current
Battery pack

Size AA (LR6)
Alkaline battery
12 V or 24 V car battery

Supplied AC power adaptor
Battery pack NP-F330 (supplied), NP-F530, NP-
F550, NP-F730, NP-F730H, NP-F750, NP-F930,
NP-F950

Supplied battery case

Sony car battery charger DC-V515A