Sony CCD-TRV95 User Manual
99
Additional information
7
6
3
1
4
5
0
!¡
!™
8
9
2
Identifying the parts
1 EDITSEARCH button (p. 21)
2 LASER LINK button (p. 67)
3 Lens cover
4 POWER switch (p. 12)
5 FOCUS switch (p. 53)
6 NEAR/FAR dial (p. 53)
7 Video control buttons (p. 22)
p
STOP (stop)
0
REW (rewind)
(
PLAY (playback)
)
FF (fastforward)
P
PAUSE (pause)
r
REC (recording)
8 Power zoom lever (p. 15)
9 Intelligent accessory shoe
0 NIGHTSHOT switch (p. 39)
!¡ Display window (p. 105)
!™ Tripod receptacle (p. 20)
Make sure that the length of the tripod
screw is less than 9/32 inch (6.5 mm)
otherwise, you cannot attach the tripod
securely and the screw may damage the
camcorder.
screw is less than 9/32 inch (6.5 mm)
otherwise, you cannot attach the tripod
securely and the screw may damage the
camcorder.
Note on the intelligent accessory shoe
Supplies power to optional accessories such as a video light or microphone. The
intelligent accessory shoe is linked to the STANDBY switch, allowing you to turn on
and off the power supplied by the shoe. Refer to the operating instructions of the
accessory for further information. To connect an accessory, press down and push it to
the end, and then tighten the screw. To remove an accessory, loosen the screw, and then
press down and pull out the accessory.
If the camcorder does not work correctly with using the AC power adaptor, use the
battery pack.
Supplies power to optional accessories such as a video light or microphone. The
intelligent accessory shoe is linked to the STANDBY switch, allowing you to turn on
and off the power supplied by the shoe. Refer to the operating instructions of the
accessory for further information. To connect an accessory, press down and push it to
the end, and then tighten the screw. To remove an accessory, loosen the screw, and then
press down and pull out the accessory.
If the camcorder does not work correctly with using the AC power adaptor, use the
battery pack.