Sony CCD-TRV32 User Manual
47
Advanced operations
Editing onto another tape
You can create your own video program by editing with any other h 8 mm, H Hi8,
j VHS, k S-VHS, VHSC, K S-VHSC, l Betamax or ¬ ED Betamax
VCR that has video/audio inputs.
j VHS, k S-VHS, VHSC, K S-VHSC, l Betamax or ¬ ED Betamax
VCR that has video/audio inputs.
Turn down the volume of the camcorder while editing. Otherwise, picture distortion
may occur.
may occur.
After connecting the camcorder to the VCR,
(1) Set the POWER switch to PLAYER.
(2) Insert a blank tape (or a tape you want to record over) into the VCR and
(2) Insert a blank tape (or a tape you want to record over) into the VCR and
insert your recorded tape into the camcorder.
(3) Play back the recorded tape on the camcorder until you locate the point
where you want to start editing, then press P to put the camcorder in
playback pause mode.
playback pause mode.
(4) On the VCR, locate the recording start point and put the VCR in recording
pause mode.
(5) Press P on the camcorder and VCR simultaneously to start editing.
To edit more scenes
Repeat steps 3 to 5.
To stop editing
Press π on both the camcorder and VCR.
STOP
PAUSE
1
3,5
POWER
CAMERA
OFF
PLAYER
REW
PLAY
FF
: Signal flow