Sony CDP-CE415 User Manual

20

You can manually fade the sound in or out to prevent
tracks from starting or ending abruptly.

During pause. 

FADE

 lights up in

the display and the Q indication
flashes. The play fades in.

When you want to start fading out.

FADE

 lights up in the display and

the q indication flashes. The play
fades out and the player pauses.

Start play fading in

End play fading out

Fading lasts for about 5 seconds. However, when you press
the FADER button during Music Scan (see page 12), the play
fades out for about 2 seconds.

You can have the player fade out automatically by
specifying the playing time. Once you set the Time
Fade, it works twice, that is, the play fades out at the
end of both sides of a tape.

1

Press EDIT/TIME FADE repeatedly before you
start playing until 

FADE

TIME

 and “A” in the 

A

indication appear in the display.

2

Press 0 or ) to specify the playing time.
Each time you press these buttons, the display
changes as shown below, with the playing time of
one side following each indication.

n

  C-46 ˜ C-54 ˜ C-60 ˜ C-74 ˜ C-90 ˜ - -. - - N

(23.00) (27.00)

(30.00) (37.00) (45.00)

EDIT/TIME FADE* 0/)

· P

7

When you record on side B, reverse the tape and
press · or P on the player to resume playing.

Press CONTINUE.

Select the tracks before doing the above procedure. The
player creates a program from the remaining tracks.

Set the tape length using the ≠ AMS ± control.
Example: When the tape length of one side is 30 minutes

and 15 seconds
1 To set the minutes, turn ≠ AMS ±

until “30” appears in the display, then push
≠ AMS ±.

2 To set the seconds, turn ≠ AMS ± until

“15” appears in the display, then push
≠ AMS ±.

See page 17.