Sony CDX-C8850R User Manual
12
Erasing tracks in a programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
MODE) for two seconds.
2
Press (2) (T) or (5) (t) to select the
track you want to erase.
track you want to erase.
The track currently registered in slot 6.
3
Press (6) (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
4
To continue erasing tracks, repeat steps
2 and 3.
2 and 3.
5
When you finish erasing tracks, press (4)
(PLAY MODE) for two seconds.
(PLAY MODE) for two seconds.
6
Press (SHIFT).
Track slot number
x
Radio
Memorising stations
automatically
automatically
— Best Tuning Memory (BTM)
The unit selects the stations with the strongest
signals and memorises them in the order of
their frequencies. You can store up to 10
stations on each band (FM1, FM2, MW, and
LW).
signals and memorises them in the order of
their frequencies. You can store up to 10
stations on each band (FM1, FM2, MW, and
LW).
Caution
When tuning in stations while driving, use
Best Tuning Memory to prevent accidents.
When tuning in stations while driving, use
Best Tuning Memory to prevent accidents.
1
Press (SOURCE) repeatedly to select the
tuner.
Each time you press (SOURCE), the source
changes as follows:
tuner.
Each time you press (SOURCE), the source
changes as follows:
CD y TUNER
2
Press (MODE) repeatedly to select the
band.
Each time you press (MODE), the band
changes as follows:
band.
Each time you press (MODE), the band
changes as follows:
B
FM1 B FM2 B MW B LW
3
Press (SHIFT), then press (4) (PLAY
MODE) repeatedly until “B.T.M” appears.
MODE) repeatedly until “B.T.M” appears.
4
Press (5) (t).
The unit stores stations in the order of their
frequencies on the number buttons.
A beep sounds when the setting is stored.
The unit stores stations in the order of their
frequencies on the number buttons.
A beep sounds when the setting is stored.
5
Press (SHIFT).
Notes
• The unit does not store stations with weak
• The unit does not store stations with weak
signals. If only a few stations are received, some
number buttons will retain their former setting.
number buttons will retain their former setting.
• When a number is indicated in the display, the
unit starts storing stations from the one currently
displayed.
displayed.