Sony CDX-CA700 User Manual

Page of 148
28
01GB02CD-EUR.fm
CDX-CA700X/CA700
3-237-606-11 (1)
masterpage:Left
Error displays/Messages
*1
When the CD/MD changer is connected to the unit, 
the disc number of the CD or MD appears in the 
display.
*2
The disc number of the disc causing the error 
appears in the display.
If these solutions do not help improve the 
situation, consult your nearest Sony dealer.
The “ST” indication flashes.
• Tune in the frequency accurately.
• The broadcast signal is too weak.
t Set to the monaural reception mode (page 
21).
A programme broadcast in stereo is heard 
in monaural.
• The unit is in monaural reception mode.
t Cancel monaural reception mode (page 
21).
RDS
The Seek starts after a few seconds of 
listening.
The station is non-TP or has a weak signal.
t Press (TA) repeatedly until “TA-OFF” 
appears.
No traffic announcements.
• Activate “TA.”
• The station does not broadcast any traffic 
announcements despite being TP.
t Tune in another station.
PTY displays “--------.”
• The current station is not an RDS station.
• RDS data has not been received.
Error displays
(For this unit and optional CD/MD changers)
The following indications will flash for about 
5 seconds, and an alarm sound will be heard.
BLANK
*
1
No tracks have been recorded on an MD.*
2
t Play an MD with recorded tracks on it.
ERROR
*
1
• An inserted CD is dirty or inserted upside 
down.*
2
t Clean or insert the CD correctly.
• An inserted CD/MD cannot play because of 
some problem.*
2
t Insert another CD/MD.
HI TEMP
The ambient temperature is more than 50°C.
t Wait until the temperature goes down 
below 50°C.
NO DISC
No disc is inserted in the CD/MD unit.
t Insert discs in the CD/MD unit.
NO MAG
The disc magazine is not inserted in the CD/
MD unit.
t Insert the magazine in the CD/MD unit.
NO MUSIC
A CD which is not a music file is inserted in 
the MP3 playable CD unit.
t Insert a music CD in the MP3 playable CD 
unit.
NOTREADY
The lid of the MD unit is open or the MDs are 
not inserted properly.
t Close the lid or insert the MDs properly.
RESET
The CD/MD unit cannot be operated because 
of some problem.
t Press the RESET button on the unit.