Sony CDX-GT500 User Manual

Page of 36
17
Error displays/Messages
*1 If an error occurs during playback of a CD or MD, 
the disc number of the CD or MD does not appear 
in the display.
*2 The disc number of the disc causing the error 
appears in the display.
If these solutions do not help improve the situation, 
consult your nearest Sony dealer.
If you take the unit to be repaired because of CD 
playback trouble, bring the disc that was used at the 
time the problem began.
Blank*
1
Tracks have not been recorded on the MD.
*
2
t Play an MD with recorded tracks.
Error*
1
• The disc is dirty or inserted upside down.
*
2
t Clean or insert the disc correctly.
• A blank disc has been inserted.
• The disc cannot play because of some problem.
t Insert another disc.
Failure (Illuminates until any button is pressed.)
The connection of speakers/amplifiers is incorrect.
t See the installation guide manual of this model to 
check the connection.
FAILURE (Illuminates for about 1 second.)
When the XM tuner is connected, storing an XM radio 
channel into a preset failed.
t Be sure to receive the channel that you want to 
store, then try it again.
Load
The changer is loading the disc.
t Wait until loading is complete.
Local Seek +/–
The local seek mode is on during automatic tuning.
NO Disc
The disc is not inserted in the CD/MD changer.
t Insert discs in the changer.
NO Disc Name
A disc name is not written in the track.
NO Group Name
A group name is not written in the track.
NO ID3 Tag
ID3 tag information is not written in the MP3 file.
NO Information
Text information is not written in the ATRAC3/
ATRAC3plus or WMA file.
NO Magazine
The disc magazine is not inserted in the CD changer.
t Insert the magazine in the changer.
NO Music
The disc is not a music file.
t Insert a music CD in this unit or MP3 playable 
changer.
NO Track Name
A track name is not written in the track.
Not Ready
The lid of the MD changer is open or the MDs are not 
inserted properly.
t Close the lid or insert the MDs properly.
Offset
There may be an internal malfunction.
t Check the connection. If the error indication 
remains on in the display, consult your nearest 
Sony dealer.
Read
The unit is reading all track and group information on 
the disc.
t Wait until reading is complete and playback starts 
automatically. Depending on the disc structure, it 
may take more than a minute.
Push Reset
The CD unit and CD/MD changer cannot be operated 
because of some problem.
t Press the RESET button (page 4).
”  or  “
During reverse or fast-forward, you have reached the 
beginning or the end of the disc and you cannot go any 
further.
The character cannot be displayed with the unit.