Sony CDX-535RF User Manual
10
Do not expose the discs to direct sunlight or
heat sources such as hot air-ducts. Do not
leave discs in a car parked in direct sunlight
where there can be a considerable rise in
temperature inside the car.
heat sources such as hot air-ducts. Do not
leave discs in a car parked in direct sunlight
where there can be a considerable rise in
temperature inside the car.
Before playing, clean the discs with an optional
cleaning cloth. Wipe each disc in the direction
of the arrows.
cleaning cloth. Wipe each disc in the direction
of the arrows.
Do not use solvents such as benzine, thinner,
commercially available cleaners, or antistatic
spray intended for analog discs.
commercially available cleaners, or antistatic
spray intended for analog discs.
Notes on discs
If you use the discs explained below, the sticky
residue can cause the CD to stop spinning and
may cause malfunction or ruin your discs.
residue can cause the CD to stop spinning and
may cause malfunction or ruin your discs.
Do not use second-hand or rental CDs that
have a sticky residue on the surface (for
example, from peeled-off stickers or from ink,
or glue leaking from under the stickers).
have a sticky residue on the surface (for
example, from peeled-off stickers or from ink,
or glue leaking from under the stickers).
There are paste residue.
Ink is sticky.
Ink is sticky.
Do not use rental CDs with old labels that are
beginning to peel off.
beginning to peel off.
Stickers that are beginning
to peel away, leaving a
sticky residue.
to peel away, leaving a
sticky residue.
Do not use your CDs with labels or stickers
attached.
attached.
Labels are attached.
Not this way
This way
Moisture condensation
On a rainy day or in a very damp area,
moisture may condense on the lenses inside
the unit, and the unit will not operate
properly. In such a case, remove the disc
magazine and wait for about an hour until
the moisture has evaporated.
moisture may condense on the lenses inside
the unit, and the unit will not operate
properly. In such a case, remove the disc
magazine and wait for about an hour until
the moisture has evaporated.
Maintenance
Fuse replacement
If the fuse blows, check the power connection
and replace the fuse. If the fuse blows again
after replacement, there may be an internal
malfunction. In such a case, consult your
nearest Sony dealer.
and replace the fuse. If the fuse blows again
after replacement, there may be an internal
malfunction. In such a case, consult your
nearest Sony dealer.
Warning
Use the specified amperage fuse.
Use of a higher amperage fuse may cause
serious damage.
Use of a higher amperage fuse may cause
serious damage.