Sony CDX-CA700 User Manual
20
01GB02CD-EUR.fm
CDX-CA700X/CA700
3-237-606-11 (1)
masterpage:Left
Adjusting the sound
characteristics
characteristics
You can adjust the bass, treble, balance and fader.
1
Select the item you want to adjust by
pressing
pressing
(SOUND)
repeatedly.
Each time you press (SOUND), the item
changes as follows:
changes as follows:
BAS (bass)
t
TRE (treble)
t
BAL (left-right)
t
FAD (front-rear)
2
Adjust the selected item by pressing
either side of
either side of
(SEEK)
.
When adjusting with the rotary commander,
press (SOUND) and rotate the VOL control.
press (SOUND) and rotate the VOL control.
Note
Adjust within 3 seconds after selecting the item.
Adjust within 3 seconds after selecting the item.
Quickly attenuating the
sound
sound
(With the rotary commander or the card
remote commander)
remote commander)
Press
(ATT)
on the rotary commander
or card remote commander.
After “ATT-ON” momentarily appears,
“ATT” appears in the display.
“ATT” appears in the display.
To restore the previous volume level, press
(ATT) again.
(ATT) again.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).
Changing the sound and
display settings
display settings
— Menu
The following items can be set:
SET (Set Up)
• CLOCK (page 9)
• CT (Clock Time) (page 18)
• BEEP — to turn the beeps on or off.
• RM (Rotary Commander) — to change the
• CT (Clock Time) (page 18)
• BEEP — to turn the beeps on or off.
• RM (Rotary Commander) — to change the
operative direction of the controls of the rotary
commander.
– Select “NORM” to use the rotary commander
commander.
– Select “NORM” to use the rotary commander
at the factory-set position.
– Select “REV” when you mount the rotary
commander on the right side of the steering
column.
column.
DSPL (Display)
• D.INFO (Dual Information) — to display the
clock and the play mode at the same time (ON).
• AMBER/GREEN — to change the
illumination colour to amber or green (CDX-
CA700 only).
CA700 only).
• M.DSPL (Motion Display) — to select the
Motion Display mode from “1,” “2,” and
“OFF.”
– Select “1” to show decoration patterns in the
“OFF.”
– Select “1” to show decoration patterns in the
display and activate Demo display.
– Select “2” to show decoration patterns in the
display and deactivate Demo display.
– Select “OFF” to deactivate the Motion
Display.
• A.SCRL (Auto Scroll)
– Select “ON” to scroll all automatically
displayed names exceeding 8 characters.
– When A.SCRL is set to off and the disc/track
name is changed, the disc/track name does
not scroll.
not scroll.