Sony CDX-CA900X User Manual
21
3
Press
<
or
,
to select the cut-off
frequency.
Each time you press
< or ,, the frequency
changes as follows:
off
(default setting)
y
125Hz
y
78Hz
4
Press
(MENU)
.
After the frequency setting is complete, the
display returns to normal playback mode.
display returns to normal playback mode.
Selecting the spectrum
analyzer (SA)
analyzer (SA)
The sound signal level is displayed on a spectrum
analyzer. You can select a display for 10 patterns
(SA·········1-9), off (spectrum analyzer off), or the
automatic display mode where all the patterns
appear.
analyzer. You can select a display for 10 patterns
(SA·········1-9), off (spectrum analyzer off), or the
automatic display mode where all the patterns
appear.
1
Press
(SOURCE)
to select a desired
source.
2
Press
(MENU)
.
3
Press
M
or
m
repeatedly until “SA”
appears.
4
Press
<
or
,
to select the desired
setting.
5
Press
(MENU)
.
After the setting is complete, the display
returns to normal playback mode.
returns to normal playback mode.
Connecting auxiliary audio
equipment
equipment
The unit’s AUX IN (external audio input)
terminal on this unit is also used as the BUS
AUDIO IN (audio input) terminal.
You can listen to the sound from your car
speakers by connecting an optional Sony
portable devices.
terminal on this unit is also used as the BUS
AUDIO IN (audio input) terminal.
You can listen to the sound from your car
speakers by connecting an optional Sony
portable devices.
Note
If you connect an optional Sony CD/MD unit, you
cannot connect any portable devices and cannot
select “AUX.”
If you connect an optional Sony CD/MD unit, you
cannot connect any portable devices and cannot
select “AUX.”
Selecting auxiliary equipment
Press
(SOURCE)
repeatedly to select
“AUX.”
Adjusting the volume level
You can adjust the volume for each connected
audio equipment.
audio equipment.
1
Press
(MENU)
, then press
M
or
m
repeatedly until “AUX Level” appears.
2
Press
(ENTER)
.
3
Press
M
or
m
repeatedly to select the
desired volume level.
The volume level is adjustable in 1 dB steps
from –6 dB to +6 dB.
from –6 dB to +6 dB.
4
Press
(MENU)
twice.
After the setting is complete, the display
returns to normal playback mode.
returns to normal playback mode.
To deactivate auxiliary equipment in
the music source display
the music source display
1
Press
(OFF)
.
CD/MD playback or radio reception stops
(the key illumination and display remain on).
(the key illumination and display remain on).
2
Press
(MENU)
.
3
Press
M
or
m
repeatedly until “AUX-
A·····on” appears.
4
Press
,
to select “AUX-A····off.”
5
Press
(MENU)
.
To restore the indication, select “AUX-A····· on.”