Sony CDX-F605X User Manual

Page of 40
10
Repeat steps 4 and 5 to adjust the equalizer 
curve.
To restore the factory-set equalizer curve, 
press and hold (ENTER).
6
Press (MENU) twice.
The setting is complete and the display 
returns to normal play/reception mode.
Labeling a station/disc
When you receive a station, or play a disc in a 
CD changer with the CUSTOM FILE function, 
you can label each station/disc with a custom 
name up to 8 characters (Station Memo/Disc 
Memo).
If you label a station/disc, the name appears on 
the list (page 9 or 12).
(With the card remote commander)
1
While receiving a station or playing a 
disc that you want to label, press 
(MENU).
2
Press 
M or m repeatedly until “Name 
Edit” appears, then press (ENTER).
3
Press 
M or m repeatedly until the 
desired character appears.
The character changes as follows:
A 
B y C ... y 0 y 1 y 2 ... y + 
 y  
... 
y s (blank space) y A
To move the digital indication, press the 
or 
,.
Repeat this operation until the entire name is 
entered.
4
Press (ENTER).
The labeling is complete and the display 
returns to normal play/reception mode.
To display the name, press (DSPL) during 
reception/playback.
Tips
• To correct or erase a character, overwrite or enter 
s
.”
• The Disc Memo always takes priority over any 
prerecorded title.
• You can label a disc on the unit if a changer with the 
CUSTOM FILE function is connected.
• “Repeat Track” and all shuffle play are suspended 
until the labeling is complete.
Deleting the custom name
(With the card remote commander)
Select the radio, or the unit that has stored the 
custom name you want to delete, then press 
(MENU).
Press 
M or m repeatedly until “Name Delete” 
appears, then press (ENTER).
The stored name will appear.
Press 
M or m repeatedly to select the name you 
want to delete.
Press and hold (ENTER).
The name is deleted. Repeat steps 3 and 4 if 
you want to delete other names.
Press (MENU) twice.
The unit returns to normal play/reception 
mode.
Adjusting menu items — MENU
You can adjust various menu settings by using 
the 4 arrow buttons on the card remote 
commander.
(With the card remote commander)
1
Press (MENU).
2
Press 
M or m repeatedly until the 
desired item appears.
3
Press 
< or , to select the desired 
setting (example: “on” or “off”).
4
Press (ENTER).
The setting is complete and the display 
returns to normal play/reception mode.
Note
Displayed items will differ, depending on the source 
and setting.
Tip
You can easily switch among categories by pressing 
and holding 
M or m.
DSPL
MENU
SCRL
LIST/
CAT
+
ENTER