Sony CDX-GT565UP User Manual

Page of 64
11
USB devices
• MSC (Mass Storage Class)-type USB 
devices compliant with the USB standard 
can be used.
• Corresponding codec is MP3 (.mp3), 
WMA (.wma), AAC (.m4a) and AAC 
(.mp4).
• Backup of data in a USB device is 
recommended.
For details on the compatibility of your USB 
device, visit the support site on the back 
cover.
Note
Connect the USB device after starting the engine.
Depending on the USB device, malfunction or 
damage may occur if it is connected before 
starting the engine.
Playing back a USB device
1
Open the USB cover, then connect the 
USB device to the USB connector with 
its USB cable.
Playback starts.
If a USB device is already connected, to start 
playback, press 
 repeatedly 
until “USB” appears.
To stop playback, press and hold 
 for 1 second.
To remove the USB device, stop the USB 
playback, then remove the USB device.
Notes
• Do not use USB devices so large or heavy that 
they may fall down due to vibration, or cause a 
loose connection.
• Do not detach the front panel during playback 
of the USB device, otherwise USB data may be 
damaged.
Changing display items
Displayed items may differ depending on 
the USB device, recording format and 
settings.
Press 
.
Notes
• The maximum number of displayable data is as 
follows.
– folders (albums): 128
– files (tracks) per folder: 500
• It may take time for playback to begin, 
depending on the amount of recorded data.
• DRM (Digital Rights Management) files may 
not be played.
• During playback or fast-forward/reverse of a 
VBR (Variable Bit Rate) MP3/WMA/AAC file, 
elapsed playing time may not display 
accurately.
• Playback of the following MP3/WMA/AAC 
files is not supported.
– lossless compression
– copyright-protected