Sony CDX-F50M User Manual
10
Deleting the custom name
1 Select the radio, or the unit that has stored the
custom name you want to delete, then press
and hold (LIST).
and hold (LIST).
2 Press and hold (DSPL).
The stored name will flash.
3 Rotate the volume control dial repeatedly to
select the name you want to delete.
4 Press and hold the select button.
The name is deleted. Repeat steps 3 and 4 to
delete other names.
delete other names.
5 Press and hold (LIST).
The unit returns to normal play/reception
mode.
mode.
With the card remote commander
In step 3, to select the name, press VOL + or –.
In step 3, to select the name, press VOL + or –.
Adjusting setup items
— SET
— SET
1
Press and hold the select button.
The setup display appears.
The setup display appears.
2
Press the select button repeatedly
until the desired item appears.
until the desired item appears.
3
Rotate the volume control dial to
select the setting (example “ON” or
“OFF”).
select the setting (example “ON” or
“OFF”).
4
Press and hold the select button.
The setup is complete and the display returns
to normal play/reception mode.
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
Displayed items will differ, depending on the source
and setting.
With the card remote commander
In step 3, to select the setting, press
In step 3, to select the setting, press
< or ,.
The following items can be set (follow the page
reference for details):
“
reference for details):
“
z
” indicates the default settings.
*1 When the unit is turned off.
*2 When the audio output is set to “SUB.”
*2 When the audio output is set to “SUB.”
Using optional equipment
CD/MD changer
Selecting the changer
1 Press (SOURCE) repeatedly until “CD” or
“MD” appears.
2 Press (MODE) repeatedly until the desired
changer appears.
Playback starts.
CLOCK-ADJ
(Clock Adjust)
(Clock Adjust)
BEEP
To set “ON” (
z
) or “OFF.”
AUX-A*
1
To turn the AUX source display
“ON” (
“ON” (
z
) or “OFF” (page 12).
SUB/REAR*
1
To switch the audio output.
– “SUB” (
– “SUB” (
z
): to output to a
subwoofer.
– “REAR”: to output to a power
amplifier.
DIM (Dimmer) To change the brightness of the
display.
– “AT” (
– “AT” (
z
): to dim the display
automatically when you turn
the lights on.
the lights on.
– “ON”: to dim the display.
– “OFF”: to deactivate the
– “OFF”: to deactivate the
dimmer.
DEMO*
1
(Demonstration)
To set “ON” (
z
) or “OFF.”
M.DSPL
(Motion
Display)
(Motion
Display)
To select the Motion Display
mode.
– “SA” (
mode.
– “SA” (
z
): to show moving
patterns and spectrum
analyzer.
analyzer.
– “ON”: to show moving
patterns.
– “OFF”: to deactivate the
Motion Display.
CONTRAST
To adjust the contrast of the
display.
The contrast level is adjustable
in 7 steps.
display.
The contrast level is adjustable
in 7 steps.
A.SCRL
(Auto Scroll)
(Auto Scroll)
To scroll long displayed items
automatically when the group/
track is changed.
– “ON”: to scroll.
– “OFF” (
automatically when the group/
track is changed.
– “ON”: to scroll.
– “OFF” (
z
): to not scroll.
LPF*
2
(Low
Pass Filter)
To select the cut-off frequency
“78HZ,” “125HZ” or “OFF”
(
“78HZ,” “125HZ” or “OFF”
(
z
).
Disc number
Unit number