Elite Screens VMAX2, 135" VMAX135UWV2 User Manual
Product codes
VMAX135UWV2
Rev. 082510-JA
info@elitescreens.com
2. For the best support of your screen, it is ideal to secure your screen into the studs of your house's internal
framework. If studs are not available, use hollow anchors for mounting your wall- screws in drywall. If you
are installing in a concrete structure, use the concrete bolts for securing your screen into concrete walls.
(Always consult a professional installer or hardware professional to ensure that the proper screws and/or
anchors are used)
framework. If studs are not available, use hollow anchors for mounting your wall- screws in drywall. If you
are installing in a concrete structure, use the concrete bolts for securing your screen into concrete walls.
(Always consult a professional installer or hardware professional to ensure that the proper screws and/or
anchors are used)
3. Ensure that both brackets are in perfect level alignment with one another. Use wall/ceiling wood
screws to secure to the wood studs. Use hollow wall anchors if mounting in drywall.
4. Position a washer to the head of the wall-screw. The washers give added stability by enabling the screw to
remain firmly anchored to the wall.
5. The screen casing is designed to accept the wall screws directly. If not using the Optional L- brackets be sure
to position the washer between the head of the wall-screw and the anchor slots on the screen’s casing
screws to secure to the wood studs. Use hollow wall anchors if mounting in drywall.
4. Position a washer to the head of the wall-screw. The washers give added stability by enabling the screw to
remain firmly anchored to the wall.
5. The screen casing is designed to accept the wall screws directly. If not using the Optional L- brackets be sure
to position the washer between the head of the wall-screw and the anchor slots on the screen’s casing
1. Select the location for your screen. Ensure that it is within a reasonable proximity from your power source.
Be sure to allow for a reasonable angle of projection.
Be sure to allow for a reasonable angle of projection.
1. Using a tape measure, mark the keyholes that are located at the back of the screen's casing end cap.
2. After marking the area and predrilled hole, insert the screw and leave at least 1/8” of an inch from the wall
to mount the screen. (Fig. 1)
2. After marking the area and predrilled hole, insert the screw and leave at least 1/8” of an inch from the wall
to mount the screen. (Fig. 1)
Regardless of mounting method, screen should be securely supported so that vibration or pulling on
the viewing surface will not cause casing to become loose or f all. Installer must insure that fasteners
used are of adequate strength and suitable for the mounting surface chosen.
the viewing surface will not cause casing to become loose or f all. Installer must insure that fasteners
used are of adequate strength and suitable for the mounting surface chosen.
PRE INSTALLATION
1. Carefully unpack the screen
2. Always handle the screen in a leveled position on a clean surface.
3. In order to protect the screen from exposure to stains, keep the screen out of contact with
2. Always handle the screen in a leveled position on a clean surface.
3. In order to protect the screen from exposure to stains, keep the screen out of contact with
foreign particles such as dust, sawdust, and/or liquids.