Sony CDX-S2000
12
Other Functions
Adjusting the balance and
fader
fader
You can adjust the balance and fader.
1
Press
(SEL)
repeatedly until “BAL” or
“FAD” appears.
Each time you press (SEL), the item changes
as follows:
as follows:
LOW
*
t
MID
*
t
HI
*
t
BAL (left-right)
t
FAD (front-rear)
*
When EQ3 is activated (page 13).
2
Press the volume +/– button to adjust
the selected item.
the selected item.
Note
Adjust within 3 seconds after selecting the item.
Adjust within 3 seconds after selecting the item.
Quickly attenuating the
sound
sound
Press
(ATT)
.
“ATT” appears in the display.
To restore the previous volume level, press
(ATT) again.
(ATT) again.
Changing the sound and
display settings
display settings
The following items can be set:
• DEMO* — to turn the demonstration display
• DEMO* — to turn the demonstration display
on or off.
– Select “ON” to activate the demonstration
– Select “ON” to activate the demonstration
display (The demonstration starts about 10
seconds after the unit is turned off).
seconds after the unit is turned off).
– Select “OFF” to deactivate the demonstration
display.
• BEEP — to turn the beeps on or off.
Selecting the desired item
Press
(SEL)
and the desired preset
number button simultaneously.
(SEL)
+
(4)
: DEMO
*
(SEL)
+
(6)
: BEEP
*
When the unit is turned off.
To cancel the item, press (SEL) and the preset
number button simultaneously again.
number button simultaneously again.