Sony CDX-MP50

Page of 80
20
Changing the sound and 
display settings
— Menu
The following items can be set:
SET (Set Up)
• A.SCRL (Auto Scroll)*
1
• M.DSPL (Motion Display) — to select the 
Motion Display mode from “1,” “2,” and 
“OFF.”
– Select “1” to show decoration patterns in the 
display and activate Demo display.
– Select “2” to show decoration patterns in the 
display and deactivate Demo display.
– Select “OFF” to deactivate the Motion 
Display.
• BEEP*
2
 — to turn the beeps on or off.
Selecting the desired item
Press 
(SEL)
 and the desired preset 
number button simultaneously.
(SEL)
 + 
(3)
: A.SCRL
*
1
(SEL)
 + 
(4)
: M.DSPL
(SEL)
 + 
(6)
: BEEP
*
2
*1
When no CD is playing, this item will not 
appear.
*2
The beep sound is output only when the built-in 
amplifier is used.
After the mode setting completed, the display 
returns to normal play mode.
Note
The displayed item will differ depending on the source.
To cancel the item, press (SEL) and the preset 
number button simultaneously again.
Setting the equalizer (EQ3)
You can select an equalizer curve for 7 music 
types (XPLOD, VOCAL, CLUB, JAZZ, NEW 
AGE, ROCK, CUSTOM, and OFF (equalizer 
OFF)).
You can store a different equalizer setting for 
each source.
Selecting the equalizer curve
1
Press 
(SOURCE)
 to select a source 
(radio, CD or MD).
2
Press 
(EQ3)
 repeatedly until the 
desired equalizer curve appears.
Each time you press (EQ3), the item 
changes.
To cancel the equalizing effect, select “OFF.”
Adjusting the equalizer curve
You can store and adjust the equalizer settings 
for different tone ranges.
1
Press 
(SOURCE)
 to select a source 
(radio, CD or MD).
2
Press 
(EQ3)
 repeatedly to select the 
desired equalizer curve.
3
Adjusting the equalizer curve.
1
Press 
(SEL)
 repeatedly to select the 
desired tone range.
Each time you press (SEL), the tone range 
changes.
LOW
 
MID 
t
 
HI (
t
 
BAL 
t
 
FAD)
 
2
Press the volume +/– button 
repeatedly to adjust to the desired 
volume level.
The volume level is adjustable by 1 dB 
steps from –10 dB to +10 dB.
3
Repeat step 
1
 and 
2
 to adjust the 
equalizer curve.
To restore the factory-set equalizer curve, 
press (SEL) for 2 seconds.
After 3 seconds, the display returns to 
normal play mode.
Note
When EQ3 is set to “OFF,” you cannot adjust the 
equalizer settings.