Sony CDX-GT71W User Manual

1

Detach the front panel (page 5).

2

Pinch both edges of the protection collar, 
then pull it out.

1

Insert both release keys simultaneously 
until they click.

2

Pull the release keys to unseat the unit.

3

Slide the unit out of the mounting.

Signal-to-noise ratio: 120 dB
Frequency response: 10 – 20,000 Hz
Wow and flutter: Below measurable limit

Tuning range: 87.5 – 107.9 MHz
Antenna (aerial) terminal: 

External antenna (aerial) connector

Intermediate frequency: 10.7 MHz/450 kHz
Usable sensitivity: 9 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono)
Harmonic distortion at 1 kHz: 0.5 % (stereo),

0.3 % (mono)

Separation: 35 dB at 1 kHz
Frequency response: 30 – 15,000 Hz

Tuning range: 530 – 1,710 kHz
Antenna (aerial) terminal: 

External antenna (aerial) connector

Intermediate frequency: 10.7 MHz/450 kHz
Sensitivity: 30 µV

Outputs: Speaker outputs (sure seal connectors)
Speaker impedance: 4 – 8 ohms
Maximum power output: 52 W 

× 4 (at 4 ohms)

Outputs: 

Audio outputs terminal (front/rear)
Subwoofer output terminal (mono)
Power antenna (aerial) relay control terminal
Power amplifier control terminal

Inputs: 

Telephone ATT control terminal
Illumination control terminal
BUS control input terminal
BUS audio input terminal
Remote controller input terminal
Antenna (aerial) input terminal
AUX input jack (stereo mini jack)

x

POWER OUTPUT AND TOTAL HARMONIC 
DISTORTION
23.2 watts per channel minimum continuous 
average power into 4 ohms, 4 channels driven 
from 20 Hz to 20 kHz with no more than 5% total 
harmonic distortion.

CEA2006 Standard
Power Output: 17 Watts RMS 

× 4 at 

4 Ohms < 1% THD+N 
SN Ratio: 82 dBA 
(reference: 1 Watt into 4 Ohms)