Sony CDX-R5715X User Manual
9
Receiving a station through a list
— LIST
— LIST
You can list up the frequency or the name. For
details on labeling a station, see page 10.
details on labeling a station, see page 10.
(With the card remote commander)
1
Select the band, then press
(LIST)
.
The frequency or station appears.
2
Press
M
or
m
repeatedly until the
desired station appears.
3
Press
(ENTER)
to receive the station.
Other functions
Changing the sound settings
Adjusting the sound
characteristics
characteristics
You can adjust the bass, treble, balance, fader
and subwoofer volume.
and subwoofer volume.
1
Select a source, then press
(SOUND)
repeatedly to select the desired item.
The item changes as follows:
BAS
(bass)
t
TRE
(treble)
t
BAL
(left-right)
t
FAD
(front-rear)
t
SUBW
(subwoofer volume)*
*
“ATT” is displayed at the lowest setting, and can
be adjusted up to 20 steps.
be adjusted up to 20 steps.
2
Press the volume +/– button
repeatedly to adjust the selected item.
repeatedly to adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
the display returns to normal play/reception
mode.
Note
Adjust within 3 seconds of selecting the item.
Adjust within 3 seconds of selecting the item.
With the card remote commander
In step 2, to adjust the selected item, press
In step 2, to adjust the selected item, press
<
or
,
.
Adjusting the equalizer curve
— EQ7 Tune
— EQ7 Tune
You can adjust and store the equalizer settings
for different tone ranges.
for different tone ranges.
(With the card remote commander)
1
Select a source, then press
(MENU)
.
2
Press
M
or
m
repeatedly until “EQ7
Tune” appears, then press
(ENTER)
.
3
Press
<
or
,
repeatedly to select the
desired equalizer type, then press
(ENTER)
.
4
Press
<
or
,
repeatedly to select the
desired frequency.
The frequency changes as follows:
62Hz
y
157Hz
y
396Hz
y
1kHz
y
2.5kHz
y
6.3kHz
y
16kHz
continue to next page
t