Sony CDX-MP30
18
Receiving traffic
announcements
announcements
— TA/TP
By activating the Traffic Announcement (TA)
and Traffic Programme (TP). You can
automatically tune in an FM station
broadcasting traffic announcements. These
settings function regardless of the current FM
programme/source, CD; the unit switches
back to the original source when the bulletin is
over.
and Traffic Programme (TP). You can
automatically tune in an FM station
broadcasting traffic announcements. These
settings function regardless of the current FM
programme/source, CD; the unit switches
back to the original source when the bulletin is
over.
Press (TA) repeatedly until “TA-ON”
appears.
The unit starts searching for traffic
information stations.
“TP” indicates reception of such stations,
and “TA” flashes during an actual traffic
announcement. The unit will continue
searching for stations available with TP if
“NO TP” is indicated.
appears.
The unit starts searching for traffic
information stations.
“TP” indicates reception of such stations,
and “TA” flashes during an actual traffic
announcement. The unit will continue
searching for stations available with TP if
“NO TP” is indicated.
To cancel all traffic announcements, select
“TA-OFF.”
“TA-OFF.”
To
Press
Cancel current
(TA)
announcement
Tip
You can also cancel the current announcement by
pressing (SOURCE) or (MODE).
You can also cancel the current announcement by
pressing (SOURCE) or (MODE).
Presetting the volume of traffic
announcements
announcements
You can preset the volume level of the traffic
announcements so you won’t miss hearing
them.
announcements so you won’t miss hearing
them.
1
Turn the VOL control dial to adjust the
desired volume level.
desired volume level.
2
Press (TA) for 2 seconds.
“TA” appears and the setting is stored.
“TA” appears and the setting is stored.
Receiving emergency
announcements
announcements
If either AF or TA is on, the unit will switch to
emergency announcements, if one comes in
while listening to an FM station or CD/MD.
emergency announcements, if one comes in
while listening to an FM station or CD/MD.
Staying with one regional
programme
programme
When AF function is on: this unit’s factory-set
setting restricts reception to a specific region,
so you won’t be switched to another regional
station with a stronger frequency.
If you leave this regional programme’s
reception area or would like to take advantage
of the whole AF function, press (AF) for
2 seconds until "REG-OFF" appears.
setting restricts reception to a specific region,
so you won’t be switched to another regional
station with a stronger frequency.
If you leave this regional programme’s
reception area or would like to take advantage
of the whole AF function, press (AF) for
2 seconds until "REG-OFF" appears.
Note
This function does not work in the United
Kingdom and in some other areas.
This function does not work in the United
Kingdom and in some other areas.
Local Link function
(United Kingdom only)
(United Kingdom only)
This function enables you to select other local
stations in the area, even if they are not stored
on your number buttons.
stations in the area, even if they are not stored
on your number buttons.
1
Press a number button ((1) to (6)) that
has a local station stored on it.
has a local station stored on it.
2
Within 5 seconds, press the number
button of the local station again.
button of the local station again.
3
Repeat this procedure until the desired
local station is received.
local station is received.