Fujitsu Primergy RX300 S6 VFY:R3006SX040IN/B3 Data Sheet

 Fujitsu PRiMERGY RX300 s6 Dual sockEt 2 u Rack sERvER 

Page 4 / 9

2 GB (1 module(s) 2 GB) DDR3, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
2 GB (1 module(s) 2 GB) DDR3, unbuffered, Ecc, 1333 Mhz, Pc3-10600, DiMM
2 GB (1 module(s) 2 GB) DDR3 lv, unbuffered, Ecc, 1333 Mhz, Pc3-10600, DiMM
4 GB (1 module(s) 4 GB) DDR3, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
4 GB (1 module(s) 4 GB) DDR3 lv, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
8 GB (1 module(s) 8 GB) DDR3, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
8 GB (1 module(s) 8 GB) DDR3 lv, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
16 GB (1 module(s) 16 GB) DDR3, registered, Ecc, 1066 Mhz, Pc3-8500, DiMM

4 GB (2 module(s) 2 GB) DDR3, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
8 GB (2 module(s) 4 GB) DDR3, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
8 GB (2 module(s) 4 GB) DDR3 lv, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
16 GB (2 module(s) 8 GB) DDR3, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
16 GB (2 module(s) 8 GB) DDR3 lv, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
32 GB (2 module(s) 16 GB) DDR3, registered, Ecc, 1066 Mhz, Pc3-8500, DiMM

6 GB (3 module(s) 2 GB) DDR3, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
12 GB (3 module(s) 4 GB) DDR3, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
12 GB (3 module(s) 4 GB) DDR3 lv, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
24 GB (3 module(s) 8 GB) DDR3, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
24 GB (3 module(s) 8 GB) DDR3 lv, registered, Ecc, 1333 Mhz, Pc3-10600, DiMM
48 GB (3 module(s) 16 GB) DDR3, registered, Ecc, 1066 Mhz, Pc3-8500, DiMM

10 x usB 2.0 (3x front, 4x rear, 2x internal for backup devices plus 1x usB stick)

2 x vGa (thereof 1x front optional)

1 x serial Rs-232-c,  usable for iRMc or system or shared

1 x serial Rs-232-c

2  x Gbit/s Ethernet

1 x dedicated service lan port for iRMc s2 (10/100 Mbit/s) 
Service LAN traffic can be switched to shared onboard Gbit LAN port

Integrated RAID 0/1 or RAID 5/6 controller for SAS base units (occupies one PCIe slot, if at least 1 HDD is configured).
see under components RaiD controller

ich10B, with two sata channels for DvD + backup

intel

®

 82575EB , 2 x 10/100/1000 Mbit/s Ethernet (i/o acceleration), vt-c (i/o acceleration and vMDq), PXE boot via lan 

from PXE server, iscsi boot (also diskless) via onboard lan

integrated Remote Management controller (iRMc s2, 32 MB attached memory incl. graphics controller), iPMi 2.0 
compatible

Infineon / separate module; TCG V1.2 compliant (option)

5 x low profile 

2 x low profile , both are notched x8 slot as well for x16 cards

two of four Pci-Express Gen2 x4 slots can be used as x8, if neighbour slot is empty.
One PCIe Gen2 x4 slot may be occupied with a modular RAID controller if configured.

6x 3.5-inch, for sas / sata or 8x 2.5” sas/sata /ssD or 12x 2.5-inch for sas/sata 

1 x 5.25/0.5-inch for cD-Rw/DvD
1 x 3.5/0.5-inch for serverview local service Panel  or local service Display 
1 x 3.5/1.6-inch for backup devices (occupies 2x 3.5-inch hDD for basic unit 6x 3.5-inch)

All possible options described in relevant system configurator.

12 x 2.5-inch hot-plug sas/sata

6 x 3.5-inch hot-plug sas/sata

8 x 2.5-inch hot-plug sas/sata

5

hot-plug