Sony CMT-CP500MD

GB

@

1

Press CLOCK/TIMER
SELECT on the remote and
press . or > on the
remote repeatedly until “MD
REC?” or “TAPE REC?”
appears in the display, then
press ENTER/YES on the
remote.

Start over from step 1.

Press CLOCK/TIMER
SELECT on the remote and
press . or > on the
remote repeatedly until
“TIMER OFF?” appears in the
display, then press ENTER/
YES on the remote.

Check the settings/
activate the timer

Change the setting

Turn off the timer

When you record from the radio, the station name
(see page 36, or frequency when the station is not
labeled), the start time and the stop time are
automatically recorded on the MD.

• The system will turn on 30 seconds before the

specified starting time.

• If the system is turned on at the specified starting

time, recording will not occur. Do not operate the
system from the time the system turns on until the
recording starts. Otherwise the timer will not be
activated correctly.

• When you record on a brand-new MD, the first 15

seconds are not recorded.

• If the system is on about 30 seconds before the

preset time, the timer-recording will not be
activated.

• The volume is reduced to minimum during

recording.

You can connect a variety of components to
your system in order to enhance it.  Make sure
that the color of the plugs matches that of the
connectors. You can also connect a personal
computer to the PC LINK connector and
operate the system from the personal computer.

PC LINK

* If the jack is covered with a cap, remove it before

use.

To the audio output
jacks on your
record player/VCR

To the optical digital
output jack of a
digital component

*

Press FUNCTION repeatedly
until “OPTICAL IN” appears
in the display.

Press FUNCTION repeatedly
until “ANALOG IN” appears
in the display.

Connect the personal computer
to the PC LINK connector
using a Sony PC connection kit
(option) that supports this
system.

Listen to the
connected digital
component

Listen to the
connected record
player/VCR

Operate the system
from a personal
computer