Sony clie peg-tg50 User Manual
12
It takes about five hours for your CLIÉ handheld to be fully charged for the first
time.
time.
The CHG LED turns off when charging is complete, but the Cradle LED Stays
on.
on.
The Battery icon turns to
when you disconnect your CLIÉ handheld
from the cradle.
Tip
Subsequent charges will require less time if you charge your CLIÉ handheld
frequently.
frequently.
Notes
• If the battery of your CLIÉ handheld is fully discharged, all data stored on the
memory in your CLIÉ handheld will be lost.
• While charging your CLIÉ handheld, do not connect external devices, such as a
computer, to the earphone jack of your CLIÉ handheld, as a malfunction may
occur.
occur.
Charging your CLI
É handheld without a cradle
You can charge your CLIÉ handheld using a plug adapter.
Attaching the plug adapter
Connect the AC power adapter to the DC IN connector of the plug adapter (1),
then connect the plug adapter to the interface connector of your CLIÉ handheld
(2).
then connect the plug adapter to the interface connector of your CLIÉ handheld
(2).
1
Connect the AC adapter to the cradle’s AC adapter
connector.
connector.
2
Connect the AC adapter to a wall outlet.
3
Insert your CLIÉ handheld at an angle into the cradle and
lay it back to fit into place.
lay it back to fit into place.
The CHG LED indicator of your CLIÉ handheld and the Cradle LED turn
on and charging starts.
Also, the Battery icon turns to
on and charging starts.
Also, the Battery icon turns to
.
AC power
adapter
adapter