Sony CMT-GPX5 User Manual

masterpage:Right

filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6-
GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB11TRB-CEL.fm]

model name[CMT-GPX7/CMT-GPX6/CMT-GPX5]

[2-067-346-11(1)]

• Refer to General item “There is no sound.” 

(page 23) and check the condition of the system.

• Connect the component properly (page 22) while 

checking:

– if the cords are connected properly.

– if the cord plugs are firmly inserted all the way.

• Turn on the connected component.

• Refer to the operating instructions supplied with 

the connected component and start playing.

• Press FUNCTION repeatedly until “MD” or 

“VIDEO” appears (page 22).

• Set the volume of the connected component 

lower.

Use buttons on the unit for the operation.

Disconnect the power cord.

Reconnect the power cord.

Press 

?/1

 to turn on the system.

Press 

x

 (CD stop), DSGX and 

?/1

 at the 

same time.

The system is reset to the factory settings. You 
should set the settings you made, such as the 
preset stations, clock, and timer.

One of the following messages may appear or 
flash in the display during operation.

There is no disc in the player.

All of the programed tracks have been erased.

You have reached the end of the disc while pressing 
and holding M during playback or pause.

You tried to program 26 or more tracks (steps).

You pressed PLAY MODE during playback.

The preset operation ended normally.

You cannot record the tape because the tab has been 
removed from the cassette.

There is no tape in the tape deck.

You cannot select the timer function when Play 
Timer or Rec Timer are not set.

Play Timer or Rec Timer start and end times are set 
to the same time.

You tried to set the clock or timer during timer 
operation.

You tried to select the timer with the clock not set.