Sony CMT-SE1 User Manual

Page of 24
12
GB
You can wake up to music at a preset time. Make 
sure you have set the clock (see “Setting the 
clock” on page 5)
.
1
Prepare the sound source you want to 
play.
• CD: Insert a disc. To start from a specific 
• TUNER: Tune in the preset radio station 
2
Press VOL +/– (or turn VOLUME control 
on the unit) to adjust the volume.
3
Press CLOCK/TIMER SET.
4
Press 
.
 or 
>
 repeatedly until 
“DAILY SET ?” appears, then press 
ENTER.
5
Set the time to start playing.
Press . or > repeatedly to set the 
hour, then press ENTER.
The minute indication flashes.
Press . or > repeatedly to set the 
minute, then press ENTER.
6
Set the time to stop playing following 
the same procedure as step 5.
7
Press 
.
 or 
>
 repeatedly until the 
desired sound source appears.
Each time you press the button, the display 
changes cyclically as follows: 
TUNER 
y CD PLAY
8
Press ENTER.
The start time, the stop time, the sound 
source and the volume appear in turn, then 
the original display returns.
9
Press 
?/1
 to turn off the system.
Other operations
Notes
• If you use the Daily Timer and the Sleep Timer at the 
same time, the Sleep Timer has priority.
• If the system is on about 15 seconds before the preset 
time, the Daily Timer will not be activated.
• You cannot use the optional component connected to 
MD (TAPE) IN jack as the sound source for Daily 
Timer.
Waking up to music
— Daily Timer
To
Do this
Check the setting
1
Press CLOCK/TIMER 
SELECT.
2
Press . or > 
repeatedly until “DAILY 
ON?” appears, then press 
ENTER.
Change the setting
Start over from step 1.
Cancel the timer
1
Press CLOCK/TIMER 
SELECT.
2
Press . or > 
repeatedly until “DAILY 
OFF?” appears, then press 
ENTER.