Sony CMT-GPX9DAB User Manual

Page of 36
22
GB
You can record a preset radio station from a 
specified time.
To timer record, you must first preset the radio 
station (see “Presetting radio stations” on 
page 13) an
d set the clock (see “Setting the 
clock” on page 9).
1
2
Press CLOCK/TIMER SET.
3
Press . or > repeatedly to select 
“REC SET”, then press ENTER.
“ON” appears and the hour indication 
flashes.
4
Set the time to start recording.
Press . or > repeatedly to set the 
hour, then press ENTER.
The minute indication flashes.
Press . or > repeatedly to set the 
minute, then press ENTER.
5
Set the time to stop recording following 
the same procedure as step 4.
The start time, the stop time, and the preset 
radio station to be recorded (e.g., “FM 5”) 
appear in turn, before the original display 
returns.
6
Load a recordable tape.
7
Press DIRECTION on the unit  
repeatedly to select “
g” to record on 
one side or “
h” (or “j”) to record 
on both sides.
8
Press N (or TAPE/nN on the unit) 
repeatedly to select the recording side. 
If you select both sides recording or front 
side recording, press N (or TAPE/nN 
on the unit) until “N” appears. If you 
record on the reverse side, press N (or 
TAPE/nN on the unit) again until “n” 
appears.
9
Press ?/1 to turn off the system.
Other operations
Notes
• If you use the Rec Timer and the Sleep Timer at the 
same time, the Sleep Timer has priority.
• Do not operate the system from the time the system 
turns on until the recording starts (about 15 seconds 
before the preset time).
• If the system is on about 15 seconds before the preset 
time, Rec Timer will not be activated.
• The volume is reduced to minimum during 
recording.
• Note that if Rec Timer is set at the same time as Play 
Timer sound source is set to tape, Rec Timer sound 
may be recorded onto the tape.
• You cannot activate the Play Timer and the Rec 
Timer at the same time.
• The Rec Timer is canceled automatically after the 
Rec Timer has been activated.
Timer recording radio 
programs
— Rec  Timer
To
Do this
Activate the timer/
check the setting
1
Press CLOCK/TIMER 
SELECT.
2
Press . or > 
repeatedly until “REC SEL” 
appears, then press ENTER.
Change the setting
Start over from step 1.
Cancel the timer
1
Press CLOCK/TIMER 
SELECT.
2
Press . or > 
repeatedly until “TIMER 
OFF” appears, then press 
ENTER.