Sony CMT-GPX7 User Manual
masterpage:Left
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-GPX7-GPX6-
GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB09TIM-CEL.fm]
GPX5\DTP\2067346111\206734611CMTGPX7CEL\GB09TIM-CEL.fm]
20
GB
model name[CMT-GPX7/CMT-GPX6/CMT-GPX5]
[2-067-346-11(1)]
To timer record, you must first preset the radio
station (see “Presetting radio stations” on
page 12) and set the clock (see “Setting the
clock” on page 8).
Use buttons on the remote for the operation.
station (see “Presetting radio stations” on
page 12) and set the clock (see “Setting the
clock” on page 8).
Use buttons on the remote for the operation.
1
Tune in the preset radio station (see
“Listening to a preset station” on
page 13).
“Listening to a preset station” on
page 13).
2
Press CLOCK/TIMER SET.
3
Press
./>
repeatedly until “REC
SET” appears, then press ENTER.
“ON” appears and the hour indication
flashes.
flashes.
4
Set the time to start recording.
Press
./>
repeatedly to set the hour,
then press ENTER.
The minute indication flashes.
Press
./>
repeatedly to set the
minute, then press ENTER.
5
Set the time to stop recording following
the same procedure as step 4.
the same procedure as step 4.
Rec Timer settings and the desired station
appear, then the original display returns.
appear, then the original display returns.
6
Load a recordable tape.
7
Press DIRECTION on the unit
repeatedly to select “
repeatedly to select “
g
” to record on
one side or “
h
” (or “
j
”) to record
on both sides.
8
Press
N
(or TAPE/
nN
on the unit)
repeatedly to select the recording side.
If you select both sides recording or front
side recording, press N (or TAPE/nN
on the unit) until “N” appears. If you
record on the reverse side, press N (or
TAPE/nN on the unit) again until “n”
appears.
side recording, press N (or TAPE/nN
on the unit) until “N” appears. If you
record on the reverse side, press N (or
TAPE/nN on the unit) again until “n”
appears.
9
Press
?/1
to turn off the system.
Other operations
Notes
• If you use Rec Timer and Sleep Timer at the same
time, Sleep Timer has priority.
• Do not operate the system from the time the system
turns on until the recording starts (about 15 seconds
before the preset time).
before the preset time).
• If the system is on about 15 seconds before the preset
time, Rec Timer will not be activated.
• The volume is reduced to minimum during
recording.
• Note that if Rec Timer is set at the same time as Play
Timer sound source is set to tape, Rec Timer sound
may be recorded onto the tape.
may be recorded onto the tape.
• You cannot activate Play Timer and Rec Timer
simultaneously.
Timer recording radio
programs
programs
— Rec Timer
To
Do this
Check the setting
1
Press CLOCK/TIMER
SELECT.
SELECT.
2
Press
./>
repeatedly
until “REC SEL” appears,
then press ENTER.
then press ENTER.
Change the setting
Start over from step 1.
Cancel the timer
1
Press CLOCK/TIMER
SELECT.
SELECT.
2
Press
./>
repeatedly
until “TIMER OFF” appears,
then press ENTER.
then press ENTER.