Sony CPD-200GS User Manual

Getting Started

Customizing Your Monitor

Using the ZOOM On-screen
Display

The ZOOM settings allow you to enlarge or reduce the
picture.
Once the setting is adjusted, it will be stored in memory for
the current input signal.

Press the MENU button.
The MENU OSD appears.

Press the ¨./> and >?// buttons to select “
ZOOM,” and press the MENU button again.
The ZOOM OSD appears.

Press the >?//buttons to adjust the picture zoom.

/ . . . to enlarge the picture
? . . . to reduce the picture

The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.

To reset, press the RESET button while the OSD is on.

Note

The picture zoom adjustment will stop as soon as either the
horizontal or vertical size reaches its maximum or minimum value.

Using the COLOR On-screen
Display

You can change the monitor’s color temperature. For
example, you can change the colors of a picture on the
screen to match the actual colors of the printed picture.
Once the setting is adjusted, it will be stored in memory for
all input signals received.

Press the MENU button.
The MENU OSD appears.

Press the ¨./> and >?// buttons to select “
COLOR,” and press the MENU button again.
The COLOR OSD appears.

If you are using Graphic Picture Enhancement (GPE)
If you are in one of the GPE modes, the following
COLOR OSD appears when “

COLOR” is selected.

This OSD allows you to reduce the color temperature
from 11,000K to 9,300K. Press the >?// buttons to
adjust the color temperature.

For more information on using GPE, See “Selecting the
Graphic Picture Enhancement (GPE) Mode” on page 16.

ZOOM

9300K
5000K

COLOR

(continued)

COLOR