Sony com-1-b User Manual

COM-1.US.2-668-393-12(2)

 

 

Setting the Connecting Method for 

Wireless LAN in Infrastructure Mode

If you usually use the same wireless network, you can set the unit to connect 
automatically to specific pre-registered wireless networks. 
If you often move between different wireless networks, you select a wireless 
network each time from a list of available wireless networks.



/ to select “Tools,” and then 



/ to select “Settings,” and then press the center 



/ to select “Network Settings,” and then press the 



/ to select “Auto Connect,” and then press the center 



/ to select “ON” or “OFF,” and then press the center 

button.
If you set to “ON”
When you turn on the wireless LAN, the unit tries to connect to the pre-
registered wireless networks until a successful connection is made. Before 
using, register the wireless network ( page 28).
If you set to “OFF”
When you turn on the wireless LAN, the available wireless networks are 
listed in the Connection Dialog. Select the wireless network from the list 
each time.

