Sony cmt-spz70 User Manual
CMT-SPZ70.GB.2-668-123-12(1)
Other Operations
Creating your own CD program
(Program Play)
Use buttons on the remote to create your own program.
1
Press CD to select the CD function.
2
Press PLAY MODE repeatedly until “PGM”
appears while the player is stopped.
3
Press DISC SKIP to select a disc.
4
Press
/ repeatedly or turn the jog
dial on the unit until the desired track number
appears.
When programming MP3 files, press
When programming MP3 files, press
+/– (select
folder) repeatedly or turn the jog dial on the
unit to select the desired folder, and then select the
desired file.
unit to select the desired folder, and then select the
desired file.
Current disc
Loaded disc
5
Press ENTER to add the track or file to the
program.
“– –.– –” appears when the total time exceeds 100
minutes for a disc, or when you select a CD track
whose number is 21 or over, or when you select an
MP3 file.
“– –.– –” appears when the total time exceeds 100
minutes for a disc, or when you select a CD track
whose number is 21 or over, or when you select an
MP3 file.
6
Repeat steps 4 through 5 to program additional
tracks or files, up to a total of 25 tracks or files.
7
To play your program of tracks or files, press
(play) .
The program remains available until you open the disc
tray. To play the same program again, select the CD
function, and press
The program remains available until you open the disc
tray. To play the same program again, select the CD
function, and press
(play) .
To cancel Program Play
Press PLAY MODE repeatedly until “PGM”
disappears while the player is stopped.
disappears while the player is stopped.
To delete the last track or file of the program
Press CLEAR while the player is stopped.
To view program information, such as total
track number of the program
Press DISPLAY repeatedly.
Tip
You can program additional tracks or files during playback by using
the jog dial.
the jog dial.
Presetting radio stations
You can preset your favorite radio stations and tune
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.
1
Tune in the desired station (see “Listening to the
radio”).
2
Press TUNER MEMORY .
Preset number
3
Press +/– repeatedly to select your desired
preset number.
If another station is already assigned to the selected
preset number, the station is replaced by the new
stations.
If another station is already assigned to the selected
preset number, the station is replaced by the new
stations.
4
Press ENTER .
5
Repeat steps 1 through 4 to store other stations.
You can preset up to 20 FM and 10 AM stations. The
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
You can preset up to 20 FM and 10 AM stations. The
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
6
To call up a preset radio station, press TUNING
MODE repeatedly until “PRESET” appears,
and then press +/– repeatedly to select the
desired preset number.
Recording onto a tape
You can record on a TYPE I (normal) tape in two ways:
CD Synchro Recording:
You can record an entire CD onto a tape.
Manual Recording:
You can record just the portions you like from a sound
source, including connected audio components.
Use buttons on the unit to control tape recording.
source, including connected audio components.
Use buttons on the unit to control tape recording.
1
Load a recordable tape with the side you want to
record facing forward.
2
Prepare the recording source.
For CD Synchro Recording:
Press CD on the remote to select the CD function.
Load the disc you want to record.
Press DISC SKIP to select a disc.
When recording a folder from an MP3 disc, press
PLAY MODE repeatedly to select “
Press CD on the remote to select the CD function.
Load the disc you want to record.
Press DISC SKIP to select a disc.
When recording a folder from an MP3 disc, press
PLAY MODE repeatedly to select “
,” and then
press
+/– (select folder) repeatedly to select
the desired folder.
To record only your favorite CD tracks in your desired
order, perform steps 2 through 6 of “Creating your
own CD program.”
To record only your favorite CD tracks in your desired
order, perform steps 2 through 6 of “Creating your
own CD program.”
For Manual Recording:
Select the desired source to record.
Select the desired source to record.
3
Set the tape deck to stand by for recording.
For CD Synchro Recording:
Press CD SYNCHRO .
Press CD SYNCHRO .
For Manual Recording:
Press
Press
PAUSE/START .
4
Start recording.
While recording, you cannot listen to other sources.
While recording, you cannot listen to other sources.
For CD Synchro Recording:
Press
Press
PAUSE/START . When the recording
is completed, the CD player and the tape deck stop
automatically. If you are recording onto a tape and
the tape reaches the end of the front side part-way
through a track or file, “TURN TAPE” appears. Turn
the tape over to the reverse side, re-insert it, and
“PUSH REC” appears. And then press
automatically. If you are recording onto a tape and
the tape reaches the end of the front side part-way
through a track or file, “TURN TAPE” appears. Turn
the tape over to the reverse side, re-insert it, and
“PUSH REC” appears. And then press
PAUSE/
START .
For Manual Recording:
Press
Press
PAUSE/START , and then start playing
the desired recording source.
If there is noise while recording from the tuner,
reposition the appropriate antenna to reduce the noise.
If there is noise while recording from the tuner,
reposition the appropriate antenna to reduce the noise.
To stop recording
Press
(stop) .
To pause recording
Press
PAUSE/START .
Notes
• Recording stops if you change to a different function.
• You cannot eject the disc during CD synchro Recording.
• You cannot eject the disc during CD synchro Recording.
Using the Timers
The system offers three timer functions. You cannot
activate both the Play Timer and the Rec Timer at the
same time. If you use either with the Sleep Timer, the
Sleep Timer has priority.
activate both the Play Timer and the Rec Timer at the
same time. If you use either with the Sleep Timer, the
Sleep Timer has priority.
Sleep Timer:
You can fall asleep to music. This function works even if
the clock is not set.
Press SLEEP on the remote repeatedly. If you select
“AUTO,” the system automatically turns off after the
current disc or tape stops or in 100 minutes.
Do not select “AUTO” during Synchro Recording of a
tape.
the clock is not set.
Press SLEEP on the remote repeatedly. If you select
“AUTO,” the system automatically turns off after the
current disc or tape stops or in 100 minutes.
Do not select “AUTO” during Synchro Recording of a
tape.
Play Timer:
You can wake up to CD, tape or tuner at a preset time.
Rec Timer:
You can record a preset radio station at a specified time.
Use buttons on the remote to control the Play Timer and
the Rec Timer. Make sure you have set the clock.
Use buttons on the remote to control the Play Timer and
the Rec Timer. Make sure you have set the clock.
1
Prepare the sound source.
For Play Timer:
Prepare the sound source, and then press VOLUME
+/– to adjust the volume.
To start from a specific CD track or MP3 file, create
your own CD program.
Prepare the sound source, and then press VOLUME
+/– to adjust the volume.
To start from a specific CD track or MP3 file, create
your own CD program.
For Rec Timer:
Tune in the preset radio station.
Tune in the preset radio station.
2
Press CLOCK/TIMER SET .
3
Press
/ repeatedly to select “PLAY
SET” or “REC SET” then press ENTER .
“ON” appears, and the hour indication flashes.
“ON” appears, and the hour indication flashes.
4
Set the time to start playing or recording.
Press
/ repeatedly to set the hour,
and then press ENTER .
The minute indication flashes. Use the procedure
above to set the minute.
The minute indication flashes. Use the procedure
above to set the minute.
5
Use the same procedure as in step 4 to set the
time to stop playing or recording.
6
Select the sound source or prepare the tape.
For Play Timer:
Press
Press
/ repeatedly until the desired
sound source appears, and then press ENTER . The
display shows the timer settings.
display shows the timer settings.
For Rec Timer:
Load a recordable tape. The display shows the timer
settings.
Load a recordable tape. The display shows the timer
settings.
7
Press
(power) to turn off the system.
The system turns on 15 seconds before the preset
time.
If the system is on at the preset time, the Play Timer
and the Rec Timer will not play or record.
time.
If the system is on at the preset time, the Play Timer
and the Rec Timer will not play or record.
To activate or check the timer again
Press CLOCK/TIMER SELECT , press
/
repeatedly until “PLAY SEL” or “REC SEL” appears,
and then press ENTER .
and then press ENTER .
To cancel the timer
Repeat the same procedure as above until “TIMER OFF”
appears, and then press ENTER .
appears, and then press ENTER .
To change the setting
Start over from step 1.
Tips
• The Play Timer setting remains as long as the setting is not canceled
manually.
• The volume is reduced to minimum during the Rec Timer.
• The Rec Timer is canceled automatically after the Rec Timer has
• The Rec Timer is canceled automatically after the Rec Timer has
been activated.
1
Make sure the power cord and speaker cords are
correctly and firmly connected.
2
Find your problem in the checklist below, and
take the indicated corrective action.
If the issue persists, contact your nearest Sony dealer.
If the issue persists, contact your nearest Sony dealer.
If the STANDBY indicator flashes
Immediately unplug the power cord, and check the
following item.
• If your system has a voltage selector, is the voltage
following item.
• If your system has a voltage selector, is the voltage
selector set to the correct voltage?
• Are you using only the supplied speakers?
• Is anything blocking the ventilation holes on the rear
• Is anything blocking the ventilation holes on the rear
of the system?
After the STANDBY indicator stops flashing,
reconnect the power cord, and turn on the system. If
the issue persists, contact your nearest Sony dealer.
reconnect the power cord, and turn on the system. If
the issue persists, contact your nearest Sony dealer.
General
Sound comes from one channel, or the left
and right volumes are unbalanced.
• Place the speakers as symmetrically as possible.
• Connect only the supplied speakers.
• Connect only the supplied speakers.
Severe hum or noise.
• Move the system away from sources of noise.
• Connect the system to a different wall socket.
• Install a noise filter (available separately) to the power
• Connect the system to a different wall socket.
• Install a noise filter (available separately) to the power
cord.
The remote does not function.
• Remove any obstacles between the remote and the
remote sensor on the unit, and position the unit
away from fluorescent lights.
away from fluorescent lights.
• Point the remote at the system’s sensor.
• Move the remote closer to the system.
• Move the remote closer to the system.
The STANDBY indicator
remains lit after
unplugging the power cord.
• The STANDBY indicator may not turn off
immediately after unplugging the power cord. This
is not a malfunction. The indicator will turn off after
about 40 seconds.
is not a malfunction. The indicator will turn off after
about 40 seconds.
CD/MP3 player
The sound skips, or the disc will not play.
• Wipe the disc clean, and replace it.
• Move the system to a location away from vibration (for
• Move the system to a location away from vibration (for
example, on top of a stable stand).
• Move the speakers away from the system, or place
them on separate stands. At high volume, speaker
vibration may cause the sound to skip.
vibration may cause the sound to skip.
Play does not start from the first track.
• Return to Normal Play by pressing PLAY MODE
repeatedly until both “PGM” and “SHUF” disappear.
Starting playback takes more time than usual.
• The following discs take a longer time to start playback.
– a disc recorded with a complicated tree structure.
– a disc recorded in multisession mode.
– a disc that has not been finalized (a disc to which data
– a disc recorded in multisession mode.
– a disc that has not been finalized (a disc to which data
can be added).
– a disc that has many folders.
Tuner
Severe hum or noise, or stations cannot be
received.
• Connect the antenna properly.
• Find a location and an orientation that provide good
• Find a location and an orientation that provide good
reception, and then set up the antenna again.
• Connect a commercially available external antenna.
• Consult your nearest Sony dealer if the supplied AM
• Consult your nearest Sony dealer if the supplied AM
antenna has come off the plastic stand.
• Turn off nearby electrical equipment.
Tape deck
The sound exhibits excessive wow or flutter
or dropout.
• Clean the capstans and pinch rollers. Also, clean and
demagnetize the tape heads. See “Precautions” for details.
To change the AM tuning interval
The AM tuning interval is factory-preset to 9 kHz (or 10
kHz, for some areas; this function is not available on the
European and Russian models).
Use buttons on the unit to change the AM tuning interval.
kHz, for some areas; this function is not available on the
European and Russian models).
Use buttons on the unit to change the AM tuning interval.
1
Tune in any AM station, and then turn off the
system.
system.
2
While holding down
, press
(power) .
All the AM preset stations are erased. To reset the
interval to the factory preset, repeat the procedure.
You cannot change the AM tuning interval in Power
Saving Mode.
All the AM preset stations are erased. To reset the
interval to the factory preset, repeat the procedure.
You cannot change the AM tuning interval in Power
Saving Mode.
To improve tuner reception
Turn off CD player power by using the CD power
management function. By default, CD power is turned on.
You cannot change the setting in Power Saving Mode.
Use buttons on the unit to turn off CD player power.
management function. By default, CD power is turned on.
You cannot change the setting in Power Saving Mode.
Use buttons on the unit to turn off CD player power.
1
Press CD/
(play/pause) to select the CD
function.
2
Press
(power) to turn off the system.
Troubleshooting
3
After “STANDBY” stops flashing, press
(power) while holding
(stop) .
“CD POWER” and “OFF” appear. With CD player
power turned off, disc access time is increased. To
turn on CD player power, repeat the procedure until
“CD POWER” and “ON” appear.
power turned off, disc access time is increased. To
turn on CD player power, repeat the procedure until
“CD POWER” and “ON” appear.
To reset the system to factory settings
If the system still does not operate properly, reset the
system to factory settings. You cannot reset the system to
factory settings in Power Saving Mode.
Use buttons on the unit to reset the unit to its factory
default settings.
system to factory settings. You cannot reset the system to
factory settings in Power Saving Mode.
Use buttons on the unit to reset the unit to its factory
default settings.
1
Disconnect and reconnect the power cord, and
then turn on the system.
2
Press PLAY MODE/TUNING MODE ,
DISPLAY and
(power) at the same
time.
All user-configured settings, such as preset radio
stations, timer, and the clock, are deleted.
All user-configured settings, such as preset radio
stations, timer, and the clock, are deleted.
Messages
CANT LOCK : The system cannot be locked after
you have done the procedure of “When carrying this
system.” Turn the power off and then on again by
pressing (power) on the unit, then perform the
procedure.
system.” Turn the power off and then on again by
pressing (power) on the unit, then perform the
procedure.
CD OVER : You have reached the end of the disc while
pressing
(fast forward) during playback or
pause.
COMPLETE : The preset operation ended normally.
LOCKED : The disc tray does not open. Contact your
LOCKED : The disc tray does not open. Contact your
nearest Sony dealer.
NO DISC : There is no disc in the player, or you have
loaded a disc that cannot be played.
NO TAB : You cannot record because the overwrite
protection tab has been removed from the cassette.
NO TAPE : There is no tape in the tape deck.
NOT IN USE : You pressed an invalid button.
PUSH SELECT : You tried to set the clock or timer
NOT IN USE : You pressed an invalid button.
PUSH SELECT : You tried to set the clock or timer
during timer operation.
PUSH STOP : You pressed PLAY MODE during
playback.
SET CLOCK : You tried to select the timer when the
clock is not set.
SET TIMER : You tried to select the timer when the
Play Timer or Rec Timer is not set.
STEP FULL : You tried to program more than 26 tracks
or files (steps).
TIME NG : The Play Timer or Rec Timer start and end
times are set to the same time.
Precautions
Discs that this system CAN play
• Audio CD
• CD-R/CD-RW (audio data/MP3 files)
• CD-R/CD-RW (audio data/MP3 files)
Discs that this system CANNOT play
• CD-ROM
• CD-R/CD-RW other than those recorded in music CD
• CD-R/CD-RW other than those recorded in music CD
format or MP3 format conforming to ISO9660 Level
1/Level 2, Joliet or multisession
1/Level 2, Joliet or multisession
• CD-R/CD-RW recorded in multisession that have not
ended by “closing the session”
• CD-R/CD-RW of poor recording quality, CD-R/CD-
RW that have scratches or are dirty, or CD-R/CD-RW
recorded with an incompatible recording device
recorded with an incompatible recording device
• CD-R/CD-RW which is finalized incorrectly
• Discs containing files other than MPEG 1 Audio Layer-
• Discs containing files other than MPEG 1 Audio Layer-
3 (MP3) files
• Discs of non-standard shape (for example, heart,
square, star)
• Discs that have adhesive tape, paper, or sticker attached
to them
• Rental or used discs with attached seals where the glue
extends beyond the seal
• Discs that have labels printed using ink that feels tacky
when touched
Notes on discs
• Before playing, wipe the disc with a cleaning cloth
from the center out to the edge.
• Do not clean discs with solvents, such as benzine
thinner, or commercially available cleaners or anti-
static spray intended for vinyl LPs.
static spray intended for vinyl LPs.
• Do not expose discs to direct sunlight or heat sources
such as hot air ducts, nor leave it in a car parked in
direct sunlight.
direct sunlight.
On safety
• The unit is not disconnected from the AC power source
(mains) as long as it is connected to the wall socket,
even if the unit itself has been turned off.
even if the unit itself has been turned off.
• Completely disconnect the power cord (mains lead)
from the wall socket (mains) if it is not going to be
used for an extended period of time. When unplugging
the unit, always grip the plug. Never pull the cord
itself.
used for an extended period of time. When unplugging
the unit, always grip the plug. Never pull the cord
itself.
• Should any solid object or liquid get into the system,
unplug the system, and have it checked by qualified
personnel before operating it again.
personnel before operating it again.
• The AC power cord can be changed only by a qualified
service facility.
On placement
• Do not place the system in an inclined position or in
locations that are extremely hot, cold, dusty, dirty, or
humid or lacking adequate ventilation, or subject to
vibration, direct sunlight or a bright light.
humid or lacking adequate ventilation, or subject to
vibration, direct sunlight or a bright light.
• Be careful when placing the unit or speakers on
surfaces that have been specially treated (for example,
with wax, oil, polish) as staining or discoloration of the
surface may result.
with wax, oil, polish) as staining or discoloration of the
surface may result.
• If the system is brought directly from a cold to a warm
location or is placed in a very damp room, moisture
may condense on the lens inside the CD player, and
cause the system to malfunction. In this situation,
remove the disc, and leave the system turned on for
about a few hours until the moisture evaporates.
may condense on the lens inside the CD player, and
cause the system to malfunction. In this situation,
remove the disc, and leave the system turned on for
about a few hours until the moisture evaporates.
On heat buildup
• Heat buildup on the unit during operation is normal and
is not cause for alarm.
• Do not touch the cabinet if it has been used
continuously at a high volume because the cabinet may
have become hot.
have become hot.
• Do not obstruct the ventilation holes.
On the speaker system
This speaker system is not magnetically shielded, and
the picture on nearby TV sets may become magnetically
distorted. In this situation, turn off the TV, wait 15 to 30
minutes, and turn it back on.
If there is no improvement, move the speakers far away
from the TV.
the picture on nearby TV sets may become magnetically
distorted. In this situation, turn off the TV, wait 15 to 30
minutes, and turn it back on.
If there is no improvement, move the speakers far away
from the TV.
Cleaning the cabinet
Clean this system with a soft cloth slightly moistened
with a mild detergent solution. Do not use any type
of abrasive pad, scouring powder, or solvent, such as
thinner, benzine, or alcohol.
with a mild detergent solution. Do not use any type
of abrasive pad, scouring powder, or solvent, such as
thinner, benzine, or alcohol.
To prevent a tape from being accidentally
recorded over
Break off the cassette’s overwrite protection tab from
side A or B as illustrated.
side A or B as illustrated.
Break off the
cassette tab
To later reuse the tape for recording, cover the broken tab
with adhesive tape.
with adhesive tape.
About a tape longer than 90 minutes
The use of the tape with more than 90 minutes of play
time is not recommended except for long, continuous
recording or playback.
time is not recommended except for long, continuous
recording or playback.
Cleaning the tape heads
Use dry- or wet-type cleaning cassette (available
separately) after every 10 hours of use, before you start
an important recording, or after playing an old tape.
Failure to clean the tape heads can cause degraded sound
quality or an inability of the unit to record or play tapes.
For details, refer to the instructions of the cleaning
cassette.
separately) after every 10 hours of use, before you start
an important recording, or after playing an old tape.
Failure to clean the tape heads can cause degraded sound
quality or an inability of the unit to record or play tapes.
For details, refer to the instructions of the cleaning
cassette.
Demagnetizing the tape heads
Use a demagnetizing cassette (available separately)
after every 20 to 30 hours of use. Failure to demagnetize
the tape heads can cause an increase in noise, a loss of
high frequency sound, and an inability to completely
erase tapes. For details, refer to the instructions of the
demagnetizing cassette.
after every 20 to 30 hours of use. Failure to demagnetize
the tape heads can cause an increase in noise, a loss of
high frequency sound, and an inability to completely
erase tapes. For details, refer to the instructions of the
demagnetizing cassette.
Specifications
Amplifier section
CMT-SPZ70
European and Russian models:
CMT-SPZ70
European and Russian models:
DIN power output (rated): 60 + 60 W (4 ohms at 1 kHz, DIN)
Continuous RMS power output (reference): 75 + 75 W (4 ohms at 1 kHz,
10% THD)
Music power output (reference): 75 + 75 W (4 ohms at 1 kHz, 10% THD)
Continuous RMS power output (reference): 75 + 75 W (4 ohms at 1 kHz,
10% THD)
Music power output (reference): 75 + 75 W (4 ohms at 1 kHz, 10% THD)
Other models:
The following are measured at AC 127 V, 60 Hz (Mexican model),
AC 120 – 127 V or AC 220 – 240 V, 50/60 Hz (Other models)
The following are measured at AC 127 V, 60 Hz (Mexican model),
AC 120 – 127 V or AC 220 – 240 V, 50/60 Hz (Other models)
DIN power output (rated): 50 + 50 W (4 ohms at 1 kHz, DIN)
Continuous RMS power output (reference): 60 + 60 W (4 ohms at 1 kHz,
10% THD)
Continuous RMS power output (reference): 60 + 60 W (4 ohms at 1 kHz,
10% THD)
Inputs
AUDIO IN: Sensitivity 250 mV, impedance 47 kilohms
Outputs
PHONES: Accepts headphones with an impedance of 8 ohms or more
SPEAKER: Accepts impedance of 4 ohms
SPEAKER: Accepts impedance of 4 ohms
CMT-SPZ50
European and Russian models:
European and Russian models:
DIN power output (rated): 40 + 40 W (6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference): 50 + 50 W (6 ohms at 1 kHz,
10% THD)
Music power output (reference): 50 + 50 W (6 ohms at 1 kHz, 10% THD)
Continuous RMS power output (reference): 50 + 50 W (6 ohms at 1 kHz,
10% THD)
Music power output (reference): 50 + 50 W (6 ohms at 1 kHz, 10% THD)
The following are measured at AC 220 – 240 V, 50/60 Hz
DIN power output (rated): 30 + 30 W (6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference): 40 + 40 W (6 ohms at 1 kHz,
10% THD)
Continuous RMS power output (reference): 40 + 40 W (6 ohms at 1 kHz,
10% THD)
Inputs
AUDIO IN: Sensitivity 250 mV, impedance 47 kilohms
Outputs
PHONES: Accepts headphones with an impedance of 8 ohms or more
SPEAKER: Accepts impedance of 6 ohms
SPEAKER: Accepts impedance of 6 ohms
CD player section
System: Compact disc and digital audio system
Laser Diode Properties
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6µW
* This output is the value measurement at a distance of 200 mm from the
Laser Output*: Less than 44.6µW
* This output is the value measurement at a distance of 200 mm from the
objective lens surface on the Optical Pick-up Block with 7mm aperture.
Frequency response: 20 Hz – 20 kHz (±2 dB)
Wavelength: 780 – 790 nm
Tape deck section
Wavelength: 780 – 790 nm
Tape deck section
Recording system: 4-track 2-channel, stereo
Frequency response: 50 – 13,000 Hz (±3 dB), using Sony TYPE I cassettes
Wow and flutter: ±0.15% W. Peak (IEC)
Frequency response: 50 – 13,000 Hz (±3 dB), using Sony TYPE I cassettes
Wow and flutter: ±0.15% W. Peak (IEC)
0.1% W. RMS (NAB)
±0.2% W. Peak (DIN)
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section:
FM tuner section:
Tuning range: 87.5 – 108.0 MHz
Antenna: FM lead antenna
Antenna terminals: 75 ohms unbalanced
Intermediate frequency: 10.7 MHz
Antenna: FM lead antenna
Antenna terminals: 75 ohms unbalanced
Intermediate frequency: 10.7 MHz
AM tuner section:
Tuning range
European and Russian models: 531 – 1,602 kHz (with 9 kHz tuning interval)
Latin American model: 530 – 1,710 kHz (with 10 kHz tuning interval)
European and Russian models: 531 – 1,602 kHz (with 9 kHz tuning interval)
Latin American model: 530 – 1,710 kHz (with 10 kHz tuning interval)
531 – 1,710 kHz (with 9 kHz tuning interval)
Other models: 530 – 1,710 kHz (with 10 kHz tuning interval)
531 – 1,602 kHz (with 9 kHz tuning interval)
Antenna: AM loop antenna
Antenna terminals: External antenna terminal
Intermediate frequency: 450 kHz
Antenna terminals: External antenna terminal
Intermediate frequency: 450 kHz
Speaker
CMT-SPZ70
Speaker system: 2-way, bass-reflex type
Speaker units
CMT-SPZ70
Speaker system: 2-way, bass-reflex type
Speaker units
Woofer: 13 cm dia., cone type
Tweeter: 4 cm dia., HDLD (High Density Layered Diaphragm) tweeter
Tweeter: 4 cm dia., HDLD (High Density Layered Diaphragm) tweeter
Nominal impedance: 4 ohms
Dimensions (w/h/d): Approx. 163 × 280 × 262 mm
Mass: Approx. 2.7 kg net per speaker
Dimensions (w/h/d): Approx. 163 × 280 × 262 mm
Mass: Approx. 2.7 kg net per speaker
CMT-SPZ50
Speaker system: 2-way, bass-reflex type
Speaker units
Speaker system: 2-way, bass-reflex type
Speaker units
Woofer: 12 cm dia., cone type
Tweeter: 4 cm dia., cone type
Tweeter: 4 cm dia., cone type
Nominal impedance: 6 ohms
Dimensions (w/h/d): Approx. 163 × 280 × 220 mm
Mass: Approx. 2.3 kg net per speaker
General
Dimensions (w/h/d): Approx. 163 × 280 × 220 mm
Mass: Approx. 2.3 kg net per speaker
General
Power requirements
Mexican model: 127 V AC, 60 Hz
Latin American model except for Mexican and Argentine models:
120 – 127 V or 220 – 240 V AC, 50/60 Hz
Adjustable with voltage selector
Other models: 220 – 240 V AC, 50/60 Hz
Latin American model except for Mexican and Argentine models:
120 – 127 V or 220 – 240 V AC, 50/60 Hz
Adjustable with voltage selector
Other models: 220 – 240 V AC, 50/60 Hz
Power consumption:
CMT-SPZ70: 45 watts
CMT-SPZ50: 40 watts
CMT-SPZ50: 40 watts
Dimensions (w/h/d) (excl. speakers): Approx. 180 × 280 × 338 mm
Mass (excl. speakers): Approx. 4.1 kg
Mass (excl. speakers): Approx. 4.1 kg
Supplied accessories: Remote Commander (1)/R6 (size AA) batteries (2)/AM
loop antenna (1)/FM lead antenna (1)
loop antenna (1)/FM lead antenna (1)
U.S. and foreign patents licensed from Dolby Laboratories.
Design and specifications are subject to change without notice.
• Standby power consumption: 0.5 W
• Halogenated flame retardants are not used in the
certain printed wiring boards.
• Lead-free solder is used for soldering certain parts.
• Halogenated flame retardants are not used in cabinets.
Selected track
or file number
Total playing time of program
(including selected track or file)