Sony CMT-SE9 User Manual
60
GB
You can use this function to cancel the last edit
and restore the contents of the MD to the
condition before the edit.
Note, however, that you cannot undo the edit if
you do any of the following after the edit:
and restore the contents of the MD to the
condition before the edit.
Note, however, that you cannot undo the edit if
you do any of the following after the edit:
• Do another edit.
• Do the recording procedure.
• Activate the Net MD function.
• Update the TOC by turning off the system or
ejecting the MD.
• Disconnect the mains lead.
1
Press MENU/NO in stop mode.
2
Press
.
or
>
repeatedly until
“Undo?” appears.
“Undo?” does not appear when there is no
editing function that can be cancelled.
editing function that can be cancelled.
3
Press ENTER.
Following message appears depending on
the last edit.
the last edit.
4
Press ENTER again.
Note
You cannot undo the S.F Edit Function.
You can change the volume of recorded tracks
using S.F (Scale Factor) Edit. The original track
is recorded over at the new recording level.
When changing the recording level, you can
select Fade-in Recording to gradually increase
the signal level at the start of recording, or Fade-
out Recording to gradually decrease the signal
level at the end of the recording.
using S.F (Scale Factor) Edit. The original track
is recorded over at the new recording level.
When changing the recording level, you can
select Fade-in Recording to gradually increase
the signal level at the start of recording, or Fade-
out Recording to gradually decrease the signal
level at the end of the recording.
Changing the overall
recording level
recording level
1
Press FUNCTION repeatedly to switch
the function to MD.
the function to MD.
2
Press PLAY MODE in stop mode
repeatedly until both “SHUF” and
“PGM” disappear.
repeatedly until both “SHUF” and
“PGM” disappear.
3
Press MENU/NO.
4
Press
.
or
>
repeatedly until “S.F
Edit?” appears, then press ENTER.
5
Press
.
or
>
repeatedly until “Tr
Level?” appears, then press ENTER.
Playback starts.
6
Press
.
or
>
repeatedly until the
track number you want to change the
recording level appears, then press
ENTER.
recording level appears, then press
ENTER.
“Level 0dB” appears.
7
While monitoring the sound, press
.
or
>
repeatedly to change the
recorded level.
The recording level can be changed from
–12 dB to +12 dB, in 2 dB steps. Change to
the optimum level while making sure that
“OVER” does not appear in the display at
the loudest portion.
–12 dB to +12 dB, in 2 dB steps. Change to
the optimum level while making sure that
“OVER” does not appear in the display at
the loudest portion.
Undoing the last edit
— Undo Function
Editing
Message
Labelling discs or tracks
Name Undo?
Erasing the titles
Creating a new group
Group Undo?
Releasing a group
Releasing all groups
Deleting a portion of a
track
track
Erase Undo?
Deleting a track
Deleting all the tracks
Moving tracks
Move Undo?
Dividing a track
Divide Undo?
Combining tracks
Combine Undo?
Changing the recorded
level after recording
level after recording
— S.F Edit Function
Adjust the level so as not to light up “OVER”.