Sony cmt-sd1 User Manual

Optional A/V Components

Press

1/u to turn off the system.

The Wakeup Timer is set. At the selected
time, the power turns on automatically
and the assigned sound source begins
playback. When the time is over the
power turns off, and returns to the
Wakeup Timer.

To change the setting

Start again from step 1.

To check the setting / To use the
timer

Press TIMER SELECT repeatedly until
“DAILY TIMER” appears. The start time,
followed by the stop time, the sound source
appears, then the original display appears.

To cancel the timer

Press TIMER SELECT repeatedly until
“TIMER OFF” appears.

Tip

To reset the Wakeup Time with the same settings,
press TIMER SELECT repeatedly until "DAILY"
appears in the display and then turn off the power.
It is not necessary to set the start and stop times
every time.

Optional A/V components

Connecting audio
components

To enhance your system, you can connect
optional components. Refer to the
instructions of each component.

Connecting an MD deck
for digital recording

You can record from CD into the MD deck
digitally by connecting an optional cable.

To the audio input of an
MD deck

To the audio output of an
MD deck

To the DIGITAL IN jack of the MD deck

Connecting an MD deck
for analogue recording

Make sure to match the color of the plugs and
the connectors. To listen to the sound of the
connected MD deck, press FUNCTION
repeatedly until “MD” appears.

Tip

When you connect a Sony MD deck, you can use the
MD

( button on this unit’s remote to perform

play, pause, and stop operations.

continued