Sony cmt-sd1 User Manual

If you have any problem using this system,
use the following checklist.

First, check that the mains lead is connected
firmly and that the speakers are connected
correctly and firmly.

Should any problem persist, consult your
nearest Sony dealer.

•Turn VOLUME clockwise.
•Make sure the headphones are not

connected.

•Check the speaker connections.
•Check the power switch on the sub

woofer.

•A TV or VCR is placed too close to the

system.  Move the system away from the
TV or VCR.

•A power interruption occurred. Set the

clock and timer settings again.

•Set the clock correctly.

•There is an obstacle between the remote

and the system.

•The remote is not pointing in the

direction of the system’s sensor.

•The batteries have run down. Replace the

batteries.

•Do not place the system in locations

where it is near an electric inverter
system.

•The operation buttons being used are

located on the cover of the remote control
and the cover is not completely closed.
Make sure that the cover of the remote
control is completely closed.

•The power switch on the back of the sub

woofer is turned to OFF. Turn the switch
to ON.

•The CD was not placed in the disc tray

properly.

•The disc tray was forced. Do not use force

to close the tray. Press 

§ to close the disc

tray or push the tray lightly.

•The CD has tape, stickers, or paste on it.

•The CD is dirty. Clean the CD with a

cleaning cloth.

•The face of the CD is scratched. Exchange

the CD.

•The CD is inserted label side down.
•Moisture condensation has built up.

Remove the CD and leave the system
turned on for about 2 hours until the
moisture evaporates.

•The player is in programme or shuffle

mode. Press PLAY MODE repeatedly
until “SHUFFLE” and “PROGRAM”
disappear.

•By pressing 

), the last track on the disc

has been exceeded. Press and hold 

≠

or 

0 or press ≠ or 0 repeatedly to

return to a track where playback can
begin.