Sony cmt-sd1 User Manual

5

Connect the mains lead of the
CMT-SD1/SD3 to a wall outlet after
you complete all the connections.

Attach the supplied front speaker pads to the
bottom of the speakers to stabilize the
speakers and prevent them from slipping.

With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.

If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.

The reflector of the satellite speaker lights up
when the power is on.

You can change the colour of the light by
turning the R, G or B dials on the bottom of
the back of the satellite speakers.

You must set the time before you can use the
timer functions.

The clock is on a 24-hour system for the
European model, and a 12-hour system for
other models.
The 24 hour system model is used for
illustration purpose.

Set the time before turning the power on.

Press TIMER SET while the power is
off.

The hour indication flashes.

Press +/– to set the hour then press
ENTER.

The minute indication flashes.

Press +/– to set the minute then
press ENTER.

The clock starts.