Sony CPD-L181A User Manual

6

…

…

Before using this monitor, check that the following items are
included in your carton:
• LCD monitor (1)
• Rear cover (1)
• Power cord (1)
• AC adapter (1)
• HD15 video signal cable (1)
• Macintosh adapter (1)
• Windows

 

 Monitor Information Disk/Utility Disk (1)

• Macintosh Utility Disk (1)
• Warranty card (1)
• These operating instructions (1)

Turn off the monitor and computer before connecting.

This monitor uses the No. 9 pin in the video signal connector for
Plug & Play (DDC2B and DDC2Bi) compatibility.  See page 20 for
the location of the No. 9 pin.
• If your computer accepts the No. 9 pin, use the supplied HD15

video signal cable.

• If your computer does not accept the No. 9 pin, please consult

your dealer for advice on obtaining an HD15 adapter.

Use the supplied Macintosh adapter.

*

Connect the supplied Macintosh adapter to the computer before
connecting the cable. This adapter is compatible with Macintosh
LC, Performa, Quadra, Power Macintosh and Power Macintosh
G3 series computers (sold before January, 1999). If you are
connecting to a Power Macintosh G3 series that sold after
January 1999, you will need a different adapter (not supplied).
Macintosh II series and some older versions of PowerBook
models may need an adapter with micro switches (not
supplied).

With the monitor and computer switched off, connect one
end of the power cord to the AC power adapter, and the AC
power adaptor to the monitor. Then connect the other end
of the power cord to a power outlet.

…

…